+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12)
+--- Thread: Winols 2.24 (/showthread.php?tid=20534)
Winols 2.24 - ROD-BENDERS - 27-12-2016
Making checksums with Winols 2.24 tutorial
Peeps keep asking me how to make checksums for ecu files, so here is a little tutorial that should help all of you who dont know how to do this get started using winols.
Checksums are very important, get them wrong and car wont start or even worse
1. If you havent installed winols 2.24 first, then do so, it can be found here on CT using the search button, this is not the search box
2. Open winols, and after you will see the empty working box, picture 1A. Now drag and drop your ecu file onto this box as in picture 1B. Now in picture 1, you can see there are 3 checksums that need correcting, winols will do this for you.
3. Follow the instructions in each picture 1a - 10 and this should get you started making checksum for your own files.
Included are two ecu files, Audi A6 3.0 lambda off ME7.1.1, one with "nochecks" (no checksum) and the other with "csok" (checksum ok).
Good luck all CT !
RE: Making checksums with Winols 2.24 tutorial - dadal - 13-01-2017
Very helpfully post mate, thanks,
I have winols2.24 but dont have chk plugin for edc15c7 fiat citroen
can someone share it please ?
RE: Making checksums with Winols 2.24 tutorial - alex68 - 13-01-2017
FOR EDC15 use cks corrector or send file and i sistem for u
RE: Making checksums with Winols 2.24 tutorial - dadal - 15-01-2017
(13-01-2017, 07:51 AM)alex68 Wrote: FOR EDC15 use cks corrector or send file and i sistem for u
Thanks Alex mate,
But I want to learn it,
Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin
RE: Making checksums with Winols 2.24 tutorial - ROD-BENDERS - 15-01-2017
Thanks Alex mate,
But I want to learn it,
Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin
[/quot
Dadal
1. First, drag and drop the original untouched file into winols in the same way as in the pictures. When it has finished loading the original file ...then
2. you can now drag and drop your modified file ontop of the original file you already loaded into winols.
3. Now you can follow the checksum procedure steps exactly as described in the pictures, correcting modfile checksums.
RE: Making checksums with Winols 2.24 tutorial - autoport - 16-01-2017
Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?
RE: Making checksums with Winols 2.24 tutorial - ROD-BENDERS - 16-01-2017
(16-01-2017, 06:36 AM)autoport Wrote: Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?
It can do no harm making checksums first, some tools will make it necessary for you to do so.
RE: Making checksums with Winols 2.24 tutorial - dadal - 22-01-2017
@ROD-BENDERS
I have tried your method,,it works perfect !! finding plugin was very hard
thanks again mate
@ Alex
software chk corrector works also good, ( on edc15.xx )
I have compared it wiht dump winols, and they are same
thanks for info
RE: Making checksums with Winols 2.24 tutorial - autoport - 23-01-2017
On this file, even if I export with checksum corrected , it will ask again when I open the exported file again....
LATE EDIT: seems that is a problem with my winols... the exported files are saved with no cs corrected. not solved yet.
RE: Making checksums with Winols 2.24 tutorial - dadal - 02-02-2017
(23-01-2017, 16:12 PM)autoport Wrote: On this file, even if I export with checksum corrected , it will ask again when I open the exported file again....
LATE EDIT: seems that is a problem with my winols... the exported files are saved with no cs corrected. not solved yet.
some modified versions of winols ( on forums ) have problem with checksum,( and other bugs) Im also looking for a better stable version