Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ObdToolUsa

  2. Martech

  3. ATM - Balkan

    atm balkan file service
  4. xcar360.com

  5. MOD FILES

  6. ProCarDiag

  7. ECU CHIPS



Post Reply 
Making checksums with Winols 2.24 tutorial
27-12-2016, 10:40 AM (This post was last modified: 27-12-2016 11:05 AM by ROD-BENDERS.)
Post: #1
Making checksums with Winols 2.24 tutorial
Making checksums with winols

Peeps keep asking me how to make checksums for ecu files, so here is a little tutorial that should help all of you who dont know how to do this get started using winols.

Checksums are very important, get them wrong and car wont start or even worse yikes

1. If you havent installed winols 2.24 first, then do so, it can be found here on CT using the search button, this is not the search box wink1

2. Open winols, and after you will see the empty working box, picture 1A. Now drag and drop your ecu file onto this box as in picture 1B. Now in picture 1, you can see there are 3 checksums that need correcting, winols will do this for you.

3. Follow the instructions in each picture 1a - 10 and this should get you started making checksum for your own files.

Included are two ecu files, Audi A6 3.0 lambda off ME7.1.1, one with "nochecks" (no checksum) and the other with "csok" (checksum ok).

Good luck all CT !

cheers


Attached File(s) Thumbnail(s)
                                               
petio 3,.0 asn_lambda_off_nochecks.rar
File Type: .rar
Downloaded: 245 times
Size: 316.57 KB

petio 3,.0 asn_lambda_off_nochecks_csok.rar
File Type: .rar
Downloaded: 180 times
Size: 316.57 KB


Was i helpful to you? Please Hit [Image: postbit_thx.gif] And [Image: postbit_reputation.gif] buttons. thumbsup
Reputation: +28 - volavka [+2] , dewons [+1] , blokers77 [+1] , Kenny [+1] , Marcos [+1] , mdanilo [+1] , xander20005 [+1] , carinae1995 [+1] , CHIKODIAG [+1] , pukymar [+1] , zmann [+1] , autoport [+1] , ombra [+1] , jenny123 [+1] , klonone [+1] , georgea [+1] , mariux0510 [+1] , Isooow [+1] , asep0079 [+1] , Busyman [+1] , ValeS [+1] , JarsaR [+1] , Zamperl [+1] , goran_25 [+1] , GAlt [+1] , achraf [+1] , macako [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: volavka , MarcinOslo , RReader , dewons , blokers77 , ToMiBoY , Kenny , BMWS1000RR , jokerdiag , Marcos , mdanilo , jansmerfowski , spider-wifi , satria_wr , xander20005 , Lucian Mc , bursuc , dadal , voronov79 , gameiruz , CHIKODIAG , pukymar , zmann , autoport , Timisdani , kooper , Pawel M , ombra , tiguan , dabaca , _estima_ , blh , jenny123 , fluorescent , kentols , klonone , georgea , zfrepairtm , mariux0510 , vwdamian , jack1403 , Isooow , elbiscuit , nedved59 , novin , ixot , asep0079 , leeoprototype , ValeS , JarsaR , florinelxxl , Zamperl , deividasn , mauroxj , goran_25 , cracy , GAlt , kevin22 , AmineBen1992 , saadane , DjRomeo , macako , Crysis05 , artkiani , alexbenz , km666 , shaan , teerak2uk , demonline
13-01-2017, 01:47 AM (This post was last modified: 13-01-2017 02:10 AM by dadal.)
Post: #2
RE: Making checksums with Winols 2.24 tutorial
Very helpfully post mate, thanks,
I have winols2.24 but dont have chk plugin for edc15c7 fiat citroen
can someone share it please ?
Find all posts by this user
Quote this message in a reply
13-01-2017, 07:51 AM
Post: #3
RE: Making checksums with Winols 2.24 tutorial
FOR EDC15 use cks corrector or send file and i sistem for u
Find all posts by this user
Quote this message in a reply
 Thanks given by: dadal
15-01-2017, 21:47 PM (This post was last modified: 15-01-2017 21:52 PM by dadal.)
Post: #4
RE: Making checksums with Winols 2.24 tutorial
(13-01-2017 07:51 AM)alex68 Wrote:  FOR EDC15 use cks corrector or send file and i sistem for u

Thanks Alex mate,
But I want to learn it,

Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin


Attached File(s) Thumbnail(s)
           
Find all posts by this user
Quote this message in a reply
 Thanks given by: nedved59
15-01-2017, 21:58 PM (This post was last modified: 15-01-2017 23:05 PM by ROD-BENDERS.)
Post: #5
RE: Making checksums with Winols 2.24 tutorial
Thanks Alex mate,
But I want to learn it,

Can someone help me with checksum, I want to use winols just for checksum, I have ver. 2.24
when I open new project winols shows this message..I m following all these steps but no luck
please tell me how to chk correting by winols ( dump is from ducato edc15c7)
need I plug in for this ecu ? I have read that chk can also be maded without plugin
[/quot

Dadal

1. First, drag and drop the original untouched file into winols in the same way as in the pictures. When it has finished loading the original file ...then
2. you can now drag and drop your modified file ontop of the original file you already loaded into winols.
3. Now you can follow the checksum procedure steps exactly as described in the pictures, correcting modfile checksums.

cheers

Was i helpful to you? Please Hit [Image: postbit_thx.gif] And [Image: postbit_reputation.gif] buttons. thumbsup
Reputation: +1 - dadal [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: koziol , dadal , dabaca , nedved59 , novin , JarsaR , AmineBen1992
16-01-2017, 03:26 AM
Post: #6
RE: Making checksums with Winols 2.24 tutorial
Good info I was also looking for that
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS
16-01-2017, 06:36 AM
Post: #7
RE: Making checksums with Winols 2.24 tutorial
Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?
Find all posts by this user
Quote this message in a reply
16-01-2017, 06:50 AM (This post was last modified: 16-01-2017 07:31 AM by ROD-BENDERS.)
Post: #8
RE: Making checksums with Winols 2.24 tutorial
(16-01-2017 06:36 AM)autoport Wrote:  Some flashing tool make the checksum automatically. but it will do no harm to do it first by winols, right?

It can do no harm making checksums first, some tools will make it necessary for you to do so.

Was i helpful to you? Please Hit [Image: postbit_thx.gif] And [Image: postbit_reputation.gif] buttons. thumbsup
Find all posts by this user
Quote this message in a reply
 Thanks given by: autoport , koziol
22-01-2017, 20:34 PM (This post was last modified: 21-06-2017 16:54 PM by ROD-BENDERS.)
Post: #9
RE: Making checksums with Winols 2.24 tutorial
@ROD-BENDERS
I have tried your method,,it works perfect !! finding plugin was very hard
thanks again mate smile1

@ Alex
software chk corrector works also good, ( on edc15.xx )
I have compared it wiht dump winols, and they are same
thanks for info smile1
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS
23-01-2017, 16:12 PM (This post was last modified: 25-01-2017 06:26 AM by autoport.)
Post: #10
RE: Making checksums with Winols 2.24 tutorial
On this file, even if I export with checksum corrected , it will ask again when I open the exported file again....

LATE EDIT: seems that is a problem with my winols... the exported files are saved with no cs corrected. not solved yet.
Find all posts by this user
Quote this message in a reply
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
0Scope WinOLS Experts!? in leeoprototype 5 571 23-02-2017 11:25 AM
Last Post: loki954
ZVW Winols map finder problem in benii75 0 351 08-02-2017 20:47 PM
Last Post: benii75
  Winols 2.24,2/26 +Ecm titanium 26000 drivers +alot of tutorials in Lucian Mc 9 4,674 04-02-2017 23:31 PM
Last Post: BOJANGLOS
  WinOls easy installer in ROD-BENDERS 6 3,306 13-01-2017 02:32 AM
Last Post: dadal
  Winols Guide in Leaking 2 711 15-12-2016 11:51 AM
Last Post: Leaking
XZBMW EDC16C31 Cant open checksums... HELP!!! in Blasteraaa 1 361 13-12-2016 16:57 PM
Last Post: milanko
  EDC16 DTC OFF tutorial need in racing 9 1,896 05-12-2016 09:09 AM
Last Post: jawier130
  WinOLS 2.24.0.0 + WinOLS ECU File Unlock + DAMOS Files in YayDoGeN 9 6,932 18-11-2016 12:05 PM
Last Post: Leaking
0Dash WinOLS Guides in georgea 6 3,457 12-11-2016 11:52 AM
Last Post: domelec
  Winols VS ECM Titanium in Blasteraaa 3 1,109 29-09-2016 08:51 AM
Last Post: domelec

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content