+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ E9X cic coding rear view camera (/showthread.php?tid=38674)
E9X cic coding rear view camera - Fx82 - 22-08-2018
I've coded for an E9X rear view camera without installing the hardware yet. I noticed when pressing the pdc button the screen doesn't switch to pdc + rear view camera.
Is it mandatory to have the emulator installed first?
MACRO_PDC
aktiv
MACRO_REARVIEW
aktiv
RVC_CIC
wert_23 (also tried wert_21)
MACRO_L6_PARKMENU
aktiv
PDC_DIRECTION
vertikal
RE: E9X cic coding rear view camera - Freddy1 - 22-08-2018
As far as I know you need to install the emulator frist, to get the RVC view
RE: E9X cic coding rear view camera - xDrive - 22-08-2018
Best way is use rear cam retrofit kit from E84 + PDC ECU from E84.
RE: E9X cic coding rear view camera - rana - 22-08-2018
you need the hardware too
RE: E9X cic coding rear view camera - Fx82 - 22-08-2018
So basically need to install everything first and then the cic will show the camera image.
What about the lines? All these all the lines which needed to be changed?
(22-08-2018, 20:20 PM)xDrive Wrote: Best way is use rear cam retrofit kit from E84 + PDC ECU from E84.
Sounds like a good solution for the next one.
Is it possible to mount the oem camera on an E90 pre-lci? Is there a p/n for the handle where the camera goes in to?
RE: E9X cic coding rear view camera - xDrive - 23-08-2018
(22-08-2018, 22:17 PM)Fx82 Wrote:
(22-08-2018, 20:20 PM)xDrive Wrote: Best way is use rear cam retrofit kit from E84 + PDC ECU from E84.
Sounds like a good solution for the next one.
Is it possible to mount the oem camera on an E90 pre-lci? Is there a p/n for the handle where the camera goes in to?
You can install cam separately from handle or use handle from F10. In any cases you have to cut luggage door for camera or handle. There is a thread with photo about such retrofit at bmwcoding.
RE: E9X cic coding rear view camera - Fx82 - 24-08-2018
Coding worked perfectly. You need to connect the hardware first then the rear camera image will pop up on the cic.