+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: Honda - Acura (https://cartechnology.co.uk/forumdisplay.php?fid=66)
+---- Thread: Good China GNA600 (/showthread.php?tid=4509)
Good China GNA600 - thusithasam - 07-06-2014
Dear friends,
If any body has Top quality GNA600 tool from china, Please tell me how can Identify good one and bad quality?
RE: Good China GNA600 - shaan - 07-06-2014
There is no good china clone for gn 600.they work fine on for ford/mazda but Honda hit and miss do not waste your money.i have tried 2 then I bought original from ebay it works
RE: Good China GNA600 - thusithasam - 08-06-2014
(07-06-2014, 15:41 PM)shaan Wrote: There is no good china clone for gn 600.they work fine on for ford/mazda but Honda hit and miss do not waste your money.i have tried 2 then I bought original from ebay it works
do you recommend any seller in ebay?
RE: Good China GNA600 - 912secured - 22-09-2014
Buy a clone hds on aliexres for 80 and run the newest. but I stopped running at 3.008 bacause of the key gen problem. Its changing every version. For ford mazda im running a clone that runs v75 ford and mazda both still work.
RE: Good China GNA600 - apoelistas - 02-07-2015
1. X-horse (clone hds) only works on windows xp and probably vista x32. It is working only when GNA600 is selected. But you can install windows xp I guess in a virtual enviroment in even vista x64 or windows 7 8 etc.
2. Him Dual board might be a better option for Europe since GNA600 is not supported in European HDS only in USA HDS option. (So I guess choose USA when installing).
I was able to use X-horse as a passthru device (in windows xp only) using the J2534 4.9 free update firwmare given by Honda to check if any ECU ECM firmwares need updating to update. So that is not bad. This is done usually by HDS but it is not working in HDS so I found a different solution.
Can also do all diagnostic but I was not able to do any calibrations or firmware updates through the HDS software.
I would love to see Vista x64 drivers produced for X-horse for Honda HDS. I have read that the Toyota TIS has produced a registry hack in order to work for windows X64. X-Horse 1.4.8 drivers dont work in Vista x64. I did manage to make the hardware recognised but still it does not work with hds. Somewhere a hack modification is needed.
RE: Good China GNA600 - Inspector_Gadget - 02-07-2015
(02-07-2015, 08:20 AM)apoelistas Wrote: 1. X-horse (clone hds) only works on windows xp and probably vista x32. It is working only when GNA600 is selected. But you can install windows xp I guess in a virtual enviroment in even vista x64 or windows 7 8 etc.
2. Him Dual board might be a better option for Europe since GNA600 is not supported in European HDS only in USA HDS option. (So I guess choose USA when installing).
I was able to use X-horse as a passthru device (in windows xp only) using the J2534 4.9 free update firwmare given by Honda to check if any ECU ECM firmwares need updating to update. So that is not bad. This is done usually by HDS but it is not working in HDS so I found a different solution.
Can also do all diagnostic but I was not able to do any calibrations or firmware updates through the HDS software.
I would love to see Vista x64 drivers produced for X-horse for Honda HDS. I have read that the Toyota TIS has produced a registry hack in order to work for windows X64. X-Horse 1.4.8 drivers dont work in Vista x64. I did manage to make the hardware recognised but still it does not work with hds. Somewhere a hack modification is needed.
VISTA , You really use this WOW.
Any look hard and you will see X-HORSE drivers pack for windows 7 64 and 32bits.
(08-06-2014, 17:54 PM)thusithasam Wrote:(07-06-2014, 15:41 PM)shaan Wrote: There is no good china clone for gn 600.they work fine on for ford/mazda but Honda hit and miss do not waste your money.i have tried 2 then I bought original from ebay it works
do you recommend any seller in ebay?
DID YOU SEE THIS PRICE OF THIS OLD TOOL ? ? ?
support for HIM and GNA600 NO LONGER .
Only really supported SPX MVCI < Did you see the price of this CLONE tool in china ?
for sure I will tell you if you are serious about HDS and some other software , BUY A GENUINE OTC so you can smile for a long time.
RE: Good China GNA600 - apoelistas - 03-07-2015
(02-07-2015, 08:55 AM)Inspector_Gadget Wrote: VISTA , You really use this WOW.
Any look hard and you will see X-HORSE drivers pack for windows 7 64 and 32bits.
Are you saying that X-horse 3 in 1 can apart from Windows XP also work on Windows 7/8 x 64 (and probably vista x64) environment for Honda HDS??????????? with a registry hack??????
As I said only Toyota TIS was posted as working in x64 environments through a registry hack. That registry hack does not work on Honda HDS (because it refers to a dll which is found only in TIS driver). Even if I can make the X-horse hardware recognized Honda hds does not read from the X-horse scanner even if GNA600 is selected (this method works in windows XP and maybe vista x32 but not X64 envlironments).
1. This is for Toyota Tis x64 registry hack
http://myvipprogrammer.jigsy.com/entries/general/how-to-install-mvci-software-on-windows-7-8-64-bit-
2. or to make it work in x64 we have to install
Microsoft Virtual PC 2007
the install in virtual pc Windows xp
3. x64 Vista or x64 Windows 7/8 does not work with Hond HDS.
Please post a website with the support information that X-horse 3 in 1 is able to work on Windows 7 x 64 and Honda HDS. If there is a registry hack similar to toyota TIS PLEASE POST. THANKS
Note the reported registry hack for x64 environments for Toyota TIS and X-horse 3 in 1 is the following:
Registry Hack: for Techstream to recognize MINI-VCI under Windows x64, the Registry has to be modified as:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PassThruSu pport.04.04]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\PassThruSu pport.04.04\XHorse - MVCI]
“Name”=”XHorse – MVCI”
“Vendor”=”XHorse ELECTRONICS Co.,Ltd.”
“ConfigApplication”=”C:\\Program Files (x86)\\XHorse Electronics\\MVCI Driver for TOYOTA TIS\\FirmwareUpdateTool.exe”
“FunctionLibrary”=”C:\\Program Files (x86)\\XHorse Electronics\\MVCI Driver for TOYOTA TIS\\MVCI32.dll”
“APIVersion”=”04.04″
“ProductVersion”=”1.1.0″
“ProtocolsSupported”=”J1850VPW:1, J1850PWM:1, CAN:1, ISO9141:1, ISO14230:1, ISO15765:1″
“J1850VPW”=dword:00000001
“J1850PWM”=dword:00000001
“ISO9141″=dword:00000001
“ISO14230″=dword:00000001
“CAN”=dword:00000001
“ISO15765″=dword:00000001
“SCI_A_ENGINE”=dword:00000000
“SCI_A_TRANS”=dword:00000000
“SCI_B_ENGINE”=dword:00000000
“SCI_B_TRANS”=dword:00000000
RE: Good China GNA600 - Inspector_Gadget - 03-07-2015
Lol are you asking or telling ?
its so funny i don't even know where to begin
lets just say i'll leave you to it seems as though you already know it all.
RE: Good China GNA600 - apoelistas - 03-07-2015
Ok you dont know the subject. This is shown by your reply. I dont want to comment any further.Xhorse 1.4.8 driver, which is the last driver produced for Honda HDS, does not install in x64 environment.
RE: Good China GNA600 - apoelistas - 04-07-2015
The reality is that I have just found a solution to make Xhorse work in x64 windows.. It took me 4 hours to manage. I just finished.
I have just checked that this method, which I tested, is making xhorse work as a passthru in Vista x64 probably all x64 and thus will work in HDS too. I am getting the lights on X-horse to open.
Some people will be very upset if I post the solution but Chinese will be happy. My XP laptop became obsolete.
I need to do more tests to see if I have all capabilities of GNA600. If it does the GNA600 will stop selling or the Xhorse will double its value (GNA600 is very expensive, and Him is more expensive, almost double priced than X-horse).
The solution is:
The registry has to changed
Some files have to be copied to the c:genrad folder.
......
......
The software modification Only works with free Honda passthru software software update program in X64 environments. Still does not work with latest HDS.