+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Solved ✔ 330ci e46 SMG to manual (/showthread.php?tid=47457)
330ci e46 SMG to manual - bm92 - 03-03-2019
Hi everybody, i make swap in e46 330ci 231hp 2001, SMG to manual 5
Mechanic done.
All the car is coded, no faults no lights.
Only one problem, can not go more than 4000 RPM.
DME MS43 can not be coded, so i need someone who can modify the flash , or send me flash from 330ci 2001 MT
Thank you all
RE: 330ci e46 SMG to manual - tokarszczak - 03-03-2019
What zb number have dme? Last sign is "2"? Most of cases auto/smg have "2" on last place in zbnumber, manual had "1". I always Flash dme for manual transmission by winkfp
RE: 330ci e46 SMG to manual - Enabled - 03-03-2019
Once whole car is coded correctly with NCS Expert, then clear dme variant adaptations. The dme flash for ms43 was the same for auto and manual, but not sure if for smg.
You can use realoem to determine the correct zb for manual, and then flash with WinKFP. I would not use aftermarket flashing/chiptuning to convert this car.
RE: 330ci e46 SMG to manual - bm92 - 03-03-2019
Inpa screenshot
If i want to just update automaticly WINKFP gives me this référence
RE: 330ci e46 SMG to manual - Thorsten - 03-03-2019
HI,
WinKFP will flash latest, available ZUSB nummer, based on existing ZUSB number...
To your problem, can you read the DME with NCS Expert?
Thorsten
RE: 330ci e46 SMG to manual - Enabled - 03-03-2019
It's the same zb for auto/smg/manual.
Just clear variant adaptation.
The "coding" for this DME is all stored in adaptation sector.
There is no NCS Expert for this...
RE: 330ci e46 SMG to manual - bm92 - 03-03-2019
I did all the hard work but forgot to disconnect SMG module
Everything is working great, no need to reflash...
Thank you all, problem solved