MEV1722 CHECKSUM ERROR 3036 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: MEV1722 CHECKSUM ERROR 3036 (/showthread.php?tid=47520) |
MEV1722 CHECKSUM ERROR 3036 - weby - 04-03-2019 Hello, after remap I have in my DME a manipulation error 3036 - wrong checksum. Now I programmed the original file with ISTA-P (ICOM) and WinKFP and the error does not go away. If I delete the DTC with Tool32 I dont get this error with Tool32 or INPA. But if I use ISTA+ 4.14.x I still get this manipulation error. Any ideas for me? Thanks for response. RE: MEV1722 CHECKSUM ERROR 3036 - filippin87 - 04-03-2019 How tool do you use? RE: MEV1722 CHECKSUM ERROR 3036 - weby - 05-03-2019 The Tuner remap this ecu with Alientech Hardware. New info. If I delete the FS in the DME no errors are present. After start engine the error is still present. RE: MEV1722 CHECKSUM ERROR 3036 - weby - 05-03-2019 I think I must overwrite the bootloader sector to fix this issue, because WinKFP only program the software file without the bootloader. I try to modify the AIF to force a bootsector update on next program but I get an error in Tool32. I use the old ZB number from the .HIS-File current zb 8656894 old zb 8652770 Code: apiJob("MEV17_2","aif_schreiben","*short VIN*;05.03.2019;8652770;8656893;7597998;000240;NFS01;0;0089V10WMN0B","") \\EDIT: Problem solved with WinKFP expert mode |