Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
MEV1722 CHECKSUM ERROR 3036
04-03-2019, 15:48 PM,
(This post was last modified: 04-03-2019, 15:49 PM by weby.)
Post: #1
|
|||
|
|||
MEV1722 CHECKSUM ERROR 3036
Hello,
after remap I have in my DME a manipulation error 3036 - wrong checksum. Now I programmed the original file with ISTA-P (ICOM) and WinKFP and the error does not go away. If I delete the DTC with Tool32 I dont get this error with Tool32 or INPA. But if I use ISTA+ 4.14.x I still get this manipulation error. Any ideas for me? Thanks for response. |
|||
04-03-2019, 16:15 PM,
Post: #2
|
|||
|
|||
RE: MEV1722 CHECKSUM ERROR 3036
How tool do you use?
|
|||
05-03-2019, 07:12 AM,
Post: #3
|
|||
|
|||
RE: MEV1722 CHECKSUM ERROR 3036
The Tuner remap this ecu with Alientech Hardware.
New info. If I delete the FS in the DME no errors are present. After start engine the error is still present. |
|||
05-03-2019, 13:36 PM,
(This post was last modified: 05-03-2019, 19:18 PM by weby.)
Post: #4
|
|||
|
|||
RE: MEV1722 CHECKSUM ERROR 3036
I think I must overwrite the bootloader sector to fix this issue, because WinKFP only program the software file without the bootloader.
I try to modify the AIF to force a bootsector update on next program but I get an error in Tool32. I use the old ZB number from the .HIS-File current zb 8656894 old zb 8652770 Code: apiJob("MEV17_2","aif_schreiben","*short VIN*;05.03.2019;8652770;8656893;7597998;000240;NFS01;0;0089V10WMN0B","") \\EDIT: Problem solved with WinKFP expert mode |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content