+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: How to solve the problem of hot start (/showthread.php?tid=5363)
How to solve the problem of hot start - naphosim - 16-07-2014
Hello, how to solve the problem of hot start to vag-group?
RE: How to solve the problem of hot start - cuiuda - 19-07-2014
Upload the file and I "fix it"
RE: How to solve the problem of hot start - Vlado ATM Chiptuning - 19-07-2014
Hello
read this it will be usefull for you...
http://garage-automotive.com/showthread.php?tid=5364&highlight=hot+start
RE: How to solve the problem of hot start - opflorin - 09-06-2015
(16-07-2014, 12:21 PM)naphosim Wrote: Hello, how to solve the problem of hot start to vag-group?
the hot start fix in only available to some 1.9 TDI engines prior to 2007 where the problem is fixed by vw by self learning adaptations.
To hot fix a 1.9 TDI (eg: BKC) you need to access engine controller and gain access by inputting a login/access code. For BKC is 12233
In the VCDS adaptation section you need to find IQ (injection quantity), usually channel 001. Increase it slowly by 50 units and observe the differences.
RE: How to solve the problem of hot start - 8baller - 18-04-2016
Older edc15 you can copy value from cold start map to hot start map
when you open map you can see that top value are blank, they need filling in