+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Engine fault (/showthread.php?tid=6547)
Engine fault - baba - 17-09-2014
45A0 rail pressure plausibility delivery controlled
who knows or had this error?
Replaced the pump valve, rail sensor and pressure regulator.
defect is the same.
pressure is higher than the nominal with 200 bar.
RE: Engine fault - starML - 17-09-2014
Remove all the injectors and check on the test bench (for example, BOSCH).
Injectors hold not the pressure and either drip into the cylinder (20%) or flows into the overflow (80%). The pressure regulator is trying to jump equalize pressure drop - the pressure in the rail is not stable => pressure plausibility
RE: Engine fault - DBMartin - 22-05-2015
Like starMl said, or wrote.
RE: Engine fault - kregiel - 29-05-2015
I think that You can chek witch injector on inpa or ista/d in live data
Best Regards
RE: Engine fault - kuks - 30-05-2015
There were problems at pressure sensor wiring.
Br