+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA can't identify vehicle (/showthread.php?tid=70929)
Pages:
1
2
ISTA can't identify vehicle - Raimo5 - 31-10-2022
Hello,
I have an issue with ISTA not identifying a vehicle. ISTA is v4.37.30 from Sedoy. I'm using ENET cable and it works fine as I can use FeatureInstaller and ZGW_search also finds the vehicle. ISTA connection manager also shows the vehicle but when I try to connect, it goes on identifying for minutes, then asks to manually enter VIN and ultimately fails to identify. PAD is active. I will also post pictures of error, connection manager and ZGW search.
Thanks
RE: ISTA can't identify vehicle - jaramillo - 31-10-2022
Change at ediabas settings to enet and autodetect, then at ista use ediabas
RE: ISTA can't identify vehicle - Raimo5 - 31-10-2022
(31-10-2022, 16:26 PM)jaramillo Wrote: Change at ediabas settings to enet and autodetect, then at ista use ediabas
Interface = ENET is already set. Is that Autodetect for TCP RemoteHost? XEthernet is also already set to Autodetect.
RE: ISTA can't identify vehicle - jaramillo - 31-10-2022
TCP...
Also change at ista the connection to point to ediabas... and done
RE: ISTA can't identify vehicle - willisodhiambo - 01-11-2022
(31-10-2022, 23:26 PM)jaramillo Wrote: TCP...
Also change at ista the connection to point to ediabas... and done
Really, ediabas with Enet cable? Last time I tried this it does not work unless with an icom
RE: ISTA can't identify vehicle - jaramillo - 01-11-2022
(01-11-2022, 13:21 PM)willisodhiambo Wrote:(31-10-2022, 23:26 PM)jaramillo Wrote: TCP...
Also change at ista the connection to point to ediabas... and done
Really, ediabas with Enet cable? Last time I tried this it does not work unless with an icom
Yes... just try...
I have faced same situation of OP. This is a different aproach to solve the issue
use Enet at ediabas with TCP 6801, not XEthernet
RE: ISTA can't identify vehicle - Stratofortress - 01-11-2022
You might want to use Ediabas Konfigurator to set the connection right.
RE: ISTA can't identify vehicle - Raimo5 - 01-11-2022
Thanks everyone. I'll give these suggestions a try in a couple of days when I have time. Will report back with findings.
RE: ISTA can't identify vehicle - m_fife - 01-11-2022
Totally agree that the EDIBIAS configurator is the best bet. This is the easiest way... be aware there are two different ENET options, I can't remember what they are but I'm pretty sure one says ENET ICOM or something. If one doesn't work try the other one.
RE: ISTA can't identify vehicle - willisodhiambo - 02-11-2022
(01-11-2022, 14:07 PM)jaramillo Wrote:(01-11-2022, 13:21 PM)willisodhiambo Wrote:(31-10-2022, 23:26 PM)jaramillo Wrote: TCP...
Also change at ista the connection to point to ediabas... and done
Really, ediabas with Enet cable? Last time I tried this it does not work unless with an icom
Yes... just try...
I have faced same situation of OP. This is a different aproach to solve the issue
use Enet at ediabas with TCP 6801, not XEthernet
Id like to try this. Give details. Interface ediabas, in ista also ediabas. What else do we change in the ediabas.ini file?