+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Bdc Flash failed at 99% SWFL_0000241a (/showthread.php?tid=88444)
Pages:
1
2
Bdc Flash failed at 99% SWFL_0000241a - sambir - 04-02-2024
Hi,
I was flashing the bdc of a mini F56 from 01-14 istep to 07-23 (latest) so it accepts HELC option.
The flash started fine but all of a sudden at 99% the car went off, eventough it is connected to a powermaintaner. The flash was at 99%, and even if the car goes off bdc stays on usually. Then the flash failed.
I tried reflashing swfl_0000241A_005_018 with a modified tal but it keeps failing. Full reflash goes fine until 241a and fails again at 99%. Tried lower istep but bdc does not accept lower btld. Tried different esys also no succes, different laptop same issue.
I think the bdc just crashed and its stuck in bootloader mode. Any suggestions?
Esys gives the error: “routinecontrolerasememoryindicatederasing”
RE: Bdc Flash failed at 99% SWFL_0000241a - Fx82 - 04-02-2024
Did you try with Ista?
RE: Bdc Flash failed at 99% SWFL_0000241a - sambir - 04-02-2024
(04-02-2024, 17:30 PM)Fx82 Wrote: Did you try with Ista?
Would that be any different?
RE: Bdc Flash failed at 99% SWFL_0000241a - Fx82 - 04-02-2024
It can solve this.
Had last week issue with a head unit. Fails on flash with e-sys however Ista solved it.
RE: Bdc Flash failed at 99% SWFL_0000241a - sambir - 06-02-2024
Issue is I cannot update all modules since the DME is tuned. Ista updates whole car, and all modules.
RE: Bdc Flash failed at 99% SWFL_0000241a - Siki78 - 06-02-2024
Is fa correct did you checked? Can you post fa and svt_ist?
RE: Bdc Flash failed at 99% SWFL_0000241a - bmchicago - 06-02-2024
(06-02-2024, 09:07 AM)sambir Wrote: Issue is I cannot update all modules since the DME is tuned. Ista updates whole car, and all modules.
determine the measures plan and before accepting it, turn off ignition and disconnect DME. turn ignition back on and accept measures plan.
RE: Bdc Flash failed at 99% SWFL_0000241a - azwgh - 06-02-2024
@sambir, did you solve it with ISTA?
RE: Bdc Flash failed at 99% SWFL_0000241a - sambir - 08-02-2024
(06-02-2024, 23:13 PM)azwgh Wrote: @sambir, did you solve it with ISTA?
No, i havent unfortunately.
(06-02-2024, 18:48 PM)bmchicago Wrote:(06-02-2024, 09:07 AM)sambir Wrote: Issue is I cannot update all modules since the DME is tuned. Ista updates whole car, and all modules.
determine the measures plan and before accepting it, turn off ignition and disconnect DME. turn ignition back on and accept measures plan.
Cant turn of igniton, controls are all dead and ista says BDC is unreadable unaccessable. Esys sees the bdc.
(06-02-2024, 17:59 PM)Siki78 Wrote: Is fa correct did you checked? Can you post fa and svt_ist?
Fa is fine. It's the cars original FA. IST SOL calculation also was just fine, I dont have access to those file now.
RE: Bdc Flash failed at 99% SWFL_0000241a - Bimbo666 - 09-02-2024
Does bdc still see ESYS?