CarTechnoloGY
dsc incorrect vin e87 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: dsc incorrect vin e87 (/showthread.php?tid=90275)

Pages: 1 2

dsc incorrect vin e87 - redog4dy - 19-03-2024

Hello, 

How to code used dsc unit into e87 ? 
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

RE: dsc incorrect vin e87 - claw - 19-03-2024

(19-03-2024, 13:26 PM)redog4dy Wrote:  Hello, 

How to code used dsc unit into e87 ? 
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.

RE: dsc incorrect vin e87 - redog4dy - 19-03-2024

(19-03-2024, 13:44 PM)claw Wrote:  
(19-03-2024, 13:26 PM)redog4dy Wrote:  Hello, 

How to code used dsc unit into e87 ? 
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.
dcan cable, i was thinking to flash it but i wasnt sure about it. 

Thank you,

RE: dsc incorrect vin e87 - bmchicago - 19-03-2024

use tool32 to write FGNSTR

RE: dsc incorrect vin e87 - Sauron - 19-03-2024

(19-03-2024, 13:53 PM)redog4dy Wrote:  
(19-03-2024, 13:44 PM)claw Wrote:  
(19-03-2024, 13:26 PM)redog4dy Wrote:  Hello, 

How to code used dsc unit into e87 ? 
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.
dcan cable, i was thinking to flash it but i wasnt sure about it. 

Thank you,

just make sure dcan is good quality, otherwise may brick module

RE: dsc incorrect vin e87 - redog4dy - 19-03-2024

(19-03-2024, 15:37 PM)bmchicago Wrote:  use tool32 to write FGNSTR

How to do this? Didn't used tool32 so much.

RE: dsc incorrect vin e87 - larshutten - 20-03-2024

If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions

RE: dsc incorrect vin e87 - tomaxsas - 20-03-2024

DSC need proper vin to calibrate.

RE: dsc incorrect vin e87 - redog4dy - 20-03-2024

(20-03-2024, 09:03 AM)larshutten Wrote:  If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions
could not code it only with ncs expert.

RE: dsc incorrect vin e87 - bmchicago - 20-03-2024

(20-03-2024, 10:55 AM)redog4dy Wrote:  
(20-03-2024, 09:03 AM)larshutten Wrote:  If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions
could not code it only with ncs expert.


pull up tool32 and load correct prg. if you dont know correct prg, use read ECU in NCS on DSC.

look for c_fg_schriben or similar and write 17+1 or 7 vin arguments