Possibly Related Threads…

***redog4dy*** · 19-03-2024, 13:26 PM,

Hello,

How to code used dsc unit into e87 ?
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

***claw*** · 19-03-2024, 13:44 PM,

(19-03-2024, 13:26 PM)redog4dy Wrote: Hello,

How to code used dsc unit into e87 ?
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.

***redog4dy*** · 19-03-2024, 13:53 PM,

(19-03-2024, 13:44 PM)claw Wrote:
(19-03-2024, 13:26 PM)redog4dy Wrote: Hello,

How to code used dsc unit into e87 ?
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.

dcan cable, i was thinking to flash it but i wasnt sure about it.

Thank you,

***bmchicago*** · 19-03-2024, 15:37 PM,

use tool32 to write FGNSTR

***Sauron*** · 19-03-2024, 18:59 PM,

(19-03-2024, 13:53 PM)redog4dy Wrote:
(19-03-2024, 13:44 PM)claw Wrote:
(19-03-2024, 13:26 PM)redog4dy Wrote: Hello,

How to code used dsc unit into e87 ?
Tried Ncs expert with empty .man but the same error and calibration isnt possible.

Regards,

Which interface are you using?

Use winkfp to flash and change VIN.
dcan cable, i was thinking to flash it but i wasnt sure about it.

Thank you,

just make sure dcan is good quality, otherwise may brick module

***redog4dy*** · 19-03-2024, 21:37 PM,

(19-03-2024, 15:37 PM)bmchicago Wrote: use tool32 to write FGNSTR

How to do this? Didn't used tool32 so much.

***larshutten*** · 20-03-2024, 09:03 AM,

If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions

***tomaxsas*** · 20-03-2024, 09:34 AM,

DSC need proper vin to calibrate.

***redog4dy*** · 20-03-2024, 10:55 AM,

(20-03-2024, 09:03 AM)larshutten Wrote: If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions

could not code it only with ncs expert.

***bmchicago*** · 20-03-2024, 11:27 AM,

(20-03-2024, 10:55 AM)redog4dy Wrote:
(20-03-2024, 09:03 AM)larshutten Wrote: If you don’t care to much about vin numbers and aif info fields. Just code with ncs and make adjustments for dsc with ista service functions
could not code it only with ncs expert.

pull up tool32 and load correct prg. if you dont know correct prg, use read ECU in NCS on DSC.

look for c_fg_schriben or similar and write 17+1 or 7 vin arguments

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	1F2108 DME incorrect data record ,variant monitoring	prikitiew	2	207	16-03-2024, 11:49 AM Last Post: prikitiew
	ISTA-P asks for incorrect part numbers?	piconerd	10	767	24-05-2023, 14:22 PM Last Post: Node
	E39 new EWS - CoAPI 1080 - Encoding code incorrect	Volum	22	2,041	10-03-2022, 22:22 PM Last Post: bmchicago
	1f2108 dme incorrect data record variant monitoring	laquangksxd	17	3,584	14-02-2022, 09:06 AM Last Post: MTKAutoHex
	Solved ✔ VTG coding incorrect error	peoe	2	618	07-07-2019, 22:19 PM Last Post: peoe
	Solved ✔ ISTA+ Vehicle Details Incorrect ??	bmwtechnophobe	2	645	20-06-2019, 20:53 PM Last Post: SweetBMW
	Global.VehicleCommunication.CoApi.2086 - Signature check incorrect	frec	11	4,031	22-03-2019, 23:40 PM Last Post: rtvegas
	E91 606 to 609 - Display resolution incorrect	Wibbles	17	2,299	06-07-2018, 21:04 PM Last Post: Wibbles
	Nettodat coding shows incorrect daten files	dimitrev	0	768	19-01-2017, 08:01 AM Last Post: dimitrev

Contact Us