+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: dsc incorrect vin e87 (/showthread.php?tid=90275)
Pages:
1
2
RE: dsc incorrect vin e87 - armenh7 - 24-03-2024
You need to change the VIN with tool32.
Open ncsexpert and get your VIN with checksum from the CAS or NFRM.
Load dsc_87.prg
Scroll to c_fg_auftrag.
In the argument box, paste the entire VIN you got from ncs.
Double click on the job or hit f5 to run the job. Job_status should be okay.
Repeat the same for c_fg_schreiben.
Empty out the argument box by hitting the clear button.
Straighten the steering wheel and run LENKWINKEL_DSC_ABGLEICHEN.
Again, job_status should read okay if everything is going good.
Close tool32, default code DSC with ncs, then open inpa, dsc, activate, and run all the calibration jobs.
If everything was done correct, you can clear codes and be done. If something is wrong, inpa will throw an error saying ecu conditions not correct.