Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CCC FSC activation for voice control
05-03-2019, 17:59 PM,
(This post was last modified: 05-03-2019, 17:59 PM by martinlink.)
Post: #11
|
|||
|
|||
RE: CCC FSC activation for voice control
We already did the whole flashing with ISTA/P and ICOM (see post #5), but this did not remove the current FSC...
I think pre-LCI CCC's could be virginized this way, but LCI ones can't. Thanks for the files, will test them out soon! |
|||
05-03-2019, 18:39 PM,
Post: #12
|
|||
|
|||
RE: CCC FSC activation for voice control
Are you set force programming program in WinKFPt configuration ?
|
|||
05-03-2019, 18:55 PM,
Post: #13
|
|||
|
|||
RE: CCC FSC activation for voice control
We didn't use WinKFP but rather ISTA. Everything was updated successfully and the i-level is now the newest.
I had a chance to test the FSCs you sent but they seem to be the same ones available on the FSC DVD 1.1. See the picture below. After altering the "Generation date" to 07.2009, it is accepted but the signature is wrong so still no voice control. Is there a possibility to get a FSC with a generation date newer than that, with the correct signature? |
|||
06-03-2019, 07:26 AM,
(This post was last modified: 06-03-2019, 07:28 AM by Hoborg.)
Post: #14
|
|||
|
|||
RE: CCC FSC activation for voice control
My FSCs are from ASAP so no chance to newer one.
There are some differences between ISTAP and WinKFPt. ISTAP does not overwrite the program if the ZUSB is the same ( overwrite only data ). Therefore, try to do it through WinKFPt with the option I wrote about. Also try to import FSC using ISTAP |
|||
06-03-2019, 07:29 AM,
(This post was last modified: 06-03-2019, 07:30 AM by martinlink.)
Post: #15
|
|||
|
|||
RE: CCC FSC activation for voice control
The zusb was different so it flashed new SW onto all the modules in CCC. But we can try...
If there is any other (faster) way to reset or virginize the CCC, I'd be happy to hear it. Also if there is a ptogram that can change the generation date without messing up the signature, this would also help... |
|||
14-08-2023, 05:29 AM,
Post: #16
|
|||
|
|||
RE: CCC FSC activation for voice control
Is there any solution for newer ilevel CCCs to get rid of old fsc?
Or just simply flash old ccc software (brown menu), import fsc and then update to newer ccc software? I have an 2007 LCI CCC replacing my broken 2005 CCC. My car comes with SVS ($620) from factory. The FSC i already have, So i would like to use SVS in the LCI CCC. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content