Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ NCSExpert error when read CAS E60 chassis!!! Please help!!!
24-08-2019, 09:27 AM,
Post: #11
RE: NCSExpert error when read CAS E60 chassis!!! Please help!!!
(24-08-2019, 09:05 AM)egyclick Wrote:  
When latency is set to 16 instead of 1 you get similar error but not exactly the same as it shows besides Coapi 2000 the following: IF-0003 DATATRANSMISSION DISTURBED.
Which is not his case now, he does need to code CAS and LMA with SSD file accordingly.

regards!
Right that egyclick, and finaly i think i do that, coded CAS and LMA with SSD created by one
forum member, finaly i got FA reading but not tested yet on the car. I back with report when i
tested but i think that is solved...  drive
25-08-2019, 07:57 AM,
Post: #12
RE: NCSExpert error when read CAS E60 chassis!!! Please help!!!
Problem solved, i load ssd file in NCS, then write and now i have FA reading in CAS and LMA. Thank to all for help!!!


Possibly Related Threads…
Thread Author Replies Views Last Post
  BMW G8x Coolant Temp error Airbus 3 72 30-05-2024, 23:09 PM
Last Post: krug
XZBMW BMW G30 D19DE7 and D35903 error codes flausatu 0 49 30-05-2024, 07:12 AM
Last Post: flausatu
XZBMW SSD Creator Ncsexpert (New Tool) scorpium59 562 41,563 30-05-2024, 05:37 AM
Last Post: wiese
  BMW E83 A1 error - MRS: No message from DSC ... ivanp 43 1,788 29-05-2024, 09:25 AM
Last Post: Node
XZBMW F33 EPS repair pack FSC error RuleNormaliai 8 807 23-05-2024, 12:59 PM
Last Post: Flash_W_88
XSMini Mini F55 EPS 4822F7 error Alyn546 19 346 22-05-2024, 22:09 PM
Last Post: Node
XZBMW BMW EOS tester (IMIB) call-up error fatfash 7 352 11-05-2024, 18:13 PM
Last Post: fatfash
  Error SIG_CHECK_FAILURE Jalami 16 2,048 10-05-2024, 07:39 AM
Last Post: grizzle
  ISTA 4.47 test plan and error delete not available bmwm3power 7 556 04-05-2024, 15:49 PM
Last Post: bmwm3power
XZBMW xdrive off with esys without error in dash dankocg 15 3,378 04-05-2024, 11:55 AM
Last Post: kami2k

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content