[alsamaraee]

Hi,

Tried to update NbtEvo ID5 in a F34. The update started well with 

• BTLD_00001FFD 100%
  
• SWFL_00002718 100%
  
• SWFL_00002719 100%
  
• SWFL_0000271A 100%
  
• SWFL_0000271C 100%
  
• SWFL_0000271E 100%
  
• SWFL_0000271F 100%
  
• SWFL_00002720 100%
  
• SWFL_00002721 100%
  
• SWFL_00002722 100%
  All went good but it fails in SWFL_00002727. here is the log text.
  

First attempt:

Code:

Read SVT before TAL execution started.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated.
<run()-> Value of 'httpServerActivation': true>
<run()-> Value of 'isDeactivateHttp': false>
<ExecutionID=2023/06/16-18:21:18.561>
<[] prepareTALExecution started [PROGRESS]>
<MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>
<MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]>
<MCDDiagService<id=38000, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_CPPC, description=ECU signaled that any ProgrammingPreCondition not fullfilled, but no further details provided from ECU!, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<[] prepareVehicleForFlash finished [PROGRESS]>
<MCDDiagService<id=354649, job=com.bmw.psdz.jobs.uds.MCD3_CheckEcuSupportsDeleteSwe, service=RDBI_ESDS - ReadDataByIdentifier EcuSupportsDeleteSwe, description=error: negative response : requestOutOfRange, link=DME_BAC3_12_ETHERNET> [DIAGSERVICE]>
<[DME_BAC3 - 12] Error while checking if ECU supports delete SWE: job failed with negative response error: 
 code: service returned global negative response
 description: Service RDBI_ESDS returned a negative response with response code requestOutOfRange; LinkName: DME_BAC3_12_ETHERNET
 severity: ERROR
 [WARN]>
<MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<MCDDiagService<id=230900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=DSC - DiagnosticSessionControl, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<MCDDiagService<id=242900, job=com.bmw.psdz.jobs.common.MCD3_ActivateProgModeCascade, service=RC_SDB - RoutineControl SetDefaultBus, description=error: timeout, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<[] Activate programming mode was not successful for: ECUId:HU_NBT2_0x63 [WARN]>
<[] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [WARN]>
<[HU_NBT2 - 63] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [THROWABLE]>
<[] ECUId:HU_NBT2_0x63 not accessible cause could not be switched to parallel programming mode [WARN]>
<[] finalizeVehicleFlash started [PROGRESS]>
<[] finalizeVehicleFlash finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "4min 57s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.

Second attempt:

Code:

<[] prepareTALExecution started [PROGRESS]>

<MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<MCDDiagService<id=84900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForFlash started [PROGRESS]>

Third attempt:

Code:

[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 42% progress on ECUId:HU_NBT2_0x63 [0% of swfl_00002727-007_047_001] [TRANSACTION]

[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 42% progress on ECUId:HU_NBT2_0x63 [0% of swfl_00002727-007_047_001] [TRANSACTION]
[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 42% progress on ECUId:HU_NBT2_0x63 [0% of swfl_00002727-007_047_001] [TRANSACTION]
[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 42% progress on ECUId:HU_NBT2_0x63 [0% of swfl_00002727-007_047_001] [TRANSACTION]
[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 42% progress on ECUId:HU_NBT2_0x63 [0% of swfl_00002727-007_047_001] [TRANSACTION]
MCDDiagService<id=333200, job=com.bmw.psdz.jobs.http.MCD3_PerformECUFlash_Http, service=RC_CHECK_MEMORY_HTTP - RoutineControl CheckMemoryHttp, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: 59% progress on ECUId:HU_NBT2_0x63 [100% of swfl_00002727-007_047_001] [TRANSACTION]
[] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [THROWABLE]
[HU_NBT2 - 63 - swfl_00002727-007_047_001] Transaction type: swDeploy;  Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

[HU_NBT2 - 63] finalizeECUFlash started [PROGRESS]
[HU_NBT2 - 63] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error: 
 code: result of the routine control service is not correct
 description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR

What do you think the fault is? I have done many NbtEvo flash before never had this issue. Tried reflash it with e-sys 3.30 and 3.39. No lock. Using ENET cable.

The unit worked fine before flashing. No rebooting or bluetooth issues.

Any help please?

nbt fault3.txt
File Type:
Downloaded:	4 times
Size:	2.44 KB

nbt fault2.txt
File Type:
Downloaded:	1 times
Size:	563 bytes

nbt_flash.txt
File Type:
Downloaded:	1 times
Size:	3.47 KB

[dasi]

Refresh from scratch with Bootloader

[alsamaraee]

Hi
I did. Last attempt was from start (bootloader)

[laquangksxd]

Try with other psdzdata

[alsamaraee]

Try with other psdzdata

Yes will do. Thank you for the advice.

[Inerceptor]

Seach test-module "bootloader mode off" in ISTA.
Unable to program Head unit- what is it called....

[alsamaraee]

Update:
Tried changing preferred protocol to UDS. Swfl_00002727 transferred well from 0 to 99% failed at 100%
NeXT will try different iLevel data.

[LeonidLunin]

Pm me if will need remote help, have experience in recovering them

[alsamaraee]

Hi,

Problem solved. Used another laptop.

Thanks