Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
08-08-2015, 12:58 PM,
Post: #1
|
||||||||||
|
||||||||||
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
I am using a K+DCAN cable with Winkfp to program the DSC, KOMBI & GWS Modules but it failed at the last stage of the progression during completion. The Errors code is 211: This Vin number is from a module taken from another BMW E60 C135xxx The Vin no. that i want there should be C445xxx This is a used GWS module that i bought(Gear selector Module)
|