[Impac]

Ok guys here is the situation got a 2010 bmw F01 750 headlights where modified with LED angel eyes, now the car has Adaptive Headlight malfunction and AngelEyes/parking lights error is it possible to FDL  code these error lights out ? And if so what are the parameters ?

Thank you

[jamam5]

Hello mate , in order to make led headlights work you will need to replace FRM module and you need to add wires from FRM to headlights , only after that you can code everything to make it work properly

[Impac]

Headlight were NOT replaced they were modified original AngelEyes were taken out and aftermarket rings were installed and now there is Adaptive Headlight error and angeleyes/parking lights errors for both so need to disable them

[jamam5]

ooo  sorry. now understand . but if you did just rings why you have adaptive headlight mulfunction ?

[Impac]

I have it all, i just need the lines for FDL coding i can do it my self

[jamam5]

I have it all, i just need the lines for FDL coding i can do it my self

then read coding from frm module and send me . i will tell which parametrs to change . for sure you looking for cold and warm checking , but i dont remember type

[Impac]

Its not only for cold and warm checking its also for adaptive headlight error i wont have the car till end off next week or next weekend just trying to figure out the parameters before i get the car

[jamam5]

read post #4 ........

[Impac]

The error was there allready for adaptive headlights malfunction, i can remove vo and code but car is heavily modified lots of custom coding thats why i wanted to know if its possible to also disable adaptive headlight malfunction error via FDL coding just like its possible with E series.