Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
08-08-2015, 13:13 PM,
Post: #1
|
||||||||||
|
||||||||||
DSC, KOMBI & GWS PROGRAMMING WITH WINKFP FAILED
I am using a K+DCAN cable with Winkfp to program the GWS, KOMBI & DSC Modules but it failed at the last stage of the progression during completion. The Errors code is 211: This Vin number is from a module taken from another BMW E60 C135xxx The Vin number (No). that i want to program in this same module, should be C445xxx This is a used GWS module that i bought(Gear selector Module)[attachment=16996] Below i am using Winkfp to program ZB No. & Vin No. to reflect my E60 VIN ending with C445xx Does any experts have any experience to solve this one? .......................................................................... Now the KOMBI Module This is the KOMBI module UIF block before & after programming (Instrument cluster)the Vin number that i want written is C445xxx to match the E60 i am working on:
|