Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ F10 SVT calculate error
25-03-2023, 09:22 AM,
Post: #1
|
|||
|
|||
F10 SVT calculate error
F10 SVT calculate error
Generating target SVT with strategy complete flash and integration level "F010-21-07-550" (target) and "F010-10-09-525" (shipment) failed. [C324] KIS error: Das logistische Teil mit der Sachnummer 9385181 ist nicht bestellbar. [1283 |
|||
25-03-2023, 10:29 AM,
(This post was last modified: 25-03-2023, 10:58 AM by Node.)
Post: #2
|
|||
|
|||
RE: F10 SVT calculate error
FRM with part number 9385181 was used in 15-03-500, 15-03-501, 15-03-502, 15-03-503 factory iLevels ONLY. So FRM most probably was replaced by a wrong one hence your problem. You will have to manually edit SVT ist to put proper FRM in there (and then skip flashing it). Then do it second time with different FA/date just for FRM.
P.S. 9385181 is HWEL 00001763_001_001_002. This was used from 14-03-500 to 15-03-503. HWEL 00001763_001_xxx_xxx was used since 13-07-500, so to calculate SVT with this FRM you could probably use any factory level between 13-07-500 to 15-03-503 inclusive. P.P.S. To tell you correct FRM for the original FRM full VIN or FA is required. |
|||
Reputation: +1 - rana [+1] | |||
25-03-2023, 12:49 PM,
Post: #3
|
|||
|
|||
RE: F10 SVT calculate error
(25-03-2023, 10:29 AM)Node Wrote: FRM with part number 9385181 was used in 15-03-500, 15-03-501, 15-03-502, 15-03-503 factory iLevels ONLY. So FRM most probably was replaced by a wrong one hence your problem. You will have to manually edit SVT ist to put proper FRM in there (and then skip flashing it). Then do it second time with different FA/date just for FRM. thank you so much i will try your way but may i ask that fault i show in picture seems for all the car now only frm |
|||
25-03-2023, 13:48 PM,
Post: #4
|
|||
|
|||
RE: F10 SVT calculate error
For F10s (and some others) you MUST HAVE a valid FRM to calculate SVT soll. When no valid FRM ESys uses latest available hence all kinds of problems. This was ALREADY discussed MULTIPLE times.
|
|||
Reputation: +2 - rana [+1] , Emelint [+1] | |||
29-03-2023, 12:51 PM,
Post: #5
|
|||
|
|||
RE: F10 SVT calculate error
done thank you Node changed frm and all go fine
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Entrynav2 Retrofit Ethernet Error | moreply | 0 | 25 |
4 hours ago Last Post: moreply |
|
BMW G8x Coolant Temp error | Airbus | 3 | 72 |
30-05-2024, 23:09 PM Last Post: krug |
|
BMW G30 D19DE7 and D35903 error codes | flausatu | 0 | 50 |
30-05-2024, 07:12 AM Last Post: flausatu |
|
BMW E83 A1 error - MRS: No message from DSC ... | ivanp | 43 | 1,796 |
29-05-2024, 09:25 AM Last Post: Node |
|
F33 EPS repair pack FSC error | RuleNormaliai | 8 | 808 |
23-05-2024, 12:59 PM Last Post: Flash_W_88 |
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 348 |
22-05-2024, 22:09 PM Last Post: Node |
|
BMW EOS tester (IMIB) call-up error | fatfash | 7 | 354 |
11-05-2024, 18:13 PM Last Post: fatfash |
|
Error SIG_CHECK_FAILURE | Jalami | 16 | 2,052 |
10-05-2024, 07:39 AM Last Post: grizzle |
|
ISTA 4.47 test plan and error delete not available | bmwm3power | 7 | 558 |
04-05-2024, 15:49 PM Last Post: bmwm3power |
|
xdrive off with esys without error in dash | dankocg | 15 | 3,386 |
04-05-2024, 11:55 AM Last Post: kami2k |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content