[spanaz1]

Kess failing to write, checksum error and pcm flash write but skip some areas

[spanaz1]

Can someone please help me with this ECU kess full backup file

[CenturionM]

sorry buddy I'm out I don't know what's going on

I would recommend a better tool and somehow restore the odi map eg Odis E + Flashdaten


then use another tool for downloading and uploading the map, preferably bench

[spanaz1]

Thanks for all the help, am sure this ECU is Bricked since I can only use kess and pcm flash to read but because I did not backup the ECU now am stuck I can't restore it. I will look for same ECU backup file if I can't find it then I have no option but to buy another ECU but I can't find it in my country

[lsalt100]

Thanks for all the help, am sure this ECU is Bricked since I can only use kess and pcm flash to read but because I did not backup the ECU now am stuck I can't restore it. I will look for same ECU backup file if I can't find it then I have no option but to buy another ECU but I can't find it in my country

is it possible to post pcmflash flash read of bricked ecu??

[spanaz1]

Yes here are the files

[lsalt100]

Hi, your first file was 1037 529204 now the flash inside is 1037 517569.
pcmflash read only flash area.....means so 0-20x0000 is empty-this is MPC part.....may be so the password is wrong cause U read password after the brick(right?)

is it possible so brick write file was different SW version then your ori 529204? can U post the file which fail to write?
pcm flash what modul are U using 53 or 71?
looks like U dont have access to MPC area 0-20x0000.
anyway odis-e solve this by factory file

if write fails due to checksumm of flash area, may be so MPC area was write fine.....