Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E90 CIC Sat Nav Country Change
23-01-2017, 03:25 AM,
Post: #1
|
|||
|
|||
E90 CIC Sat Nav Country Change
Hi Everyone
Got recently japanese E90 with CIC unit (2010 model). Now I am trying to converte GPS to my country' specs. As I understand I have to change VO in CAS and FRM, so I have deleted VO for Japanese specs . Added English and VO of my country's radio and got those units coded. In CCC I remember I had to code CTUNE and CAPPL as well. However in CIC there are no such modules. The question is, what module do I need to code, is it just CIC and CID or something else too? Also, after coding do I need to use WINKFP to update any modules (again on CCC I had to update 5 modules), if so which modules do I need to update with WINKFP. Or is it something else needs to be done, like adding another GPS receiver etc? Many thanks for your help |
|||
23-01-2017, 05:29 AM,
Post: #2
|
|||
|
|||
RE: E90 CIC Sat Nav Country Change
Try with ista-p.
As far as I know cic with Japan spec has different hardware. I'm not sure if everything will work in your countyr. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
23-01-2017, 07:07 AM,
Post: #3
|
|||
|
|||
RE: E90 CIC Sat Nav Country Change
(23-01-2017, 05:29 AM)Fx82 Wrote: Try with ista-p. Never tried with ista.... Could you please explain what exactly do I need to do there? Just update CIC modules after VO change? Yes, CCC has different hardware and HDD but it can be reprogrammed. Not sure with CIC in this case. |
|||
26-01-2017, 21:46 PM,
Post: #4
|
|||
|
|||
RE: E90 CIC Sat Nav Country Change
Exactly modify vo and start ista-p.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
31-01-2017, 11:57 AM,
Post: #5
|
|||
|
|||
RE: E90 CIC Sat Nav Country Change
|
|||
01-02-2017, 20:38 PM,
Post: #6
|
|||
|
|||
RE: E90 CIC Sat Nav Country Change
(31-01-2017, 11:57 AM)BMWholic Wrote:(26-01-2017, 21:46 PM)Fx82 Wrote: Exactly modify vo and start ista-p. Tried the same for a us spec car with ccc, but ista/p didn't accept it, had to replace all ccc modules it says.... No i did it with ncsexpert an ncs dummy.... only language... don't know how to change voice... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content