[ishaqmir]

Hi everyone

A few years ago I used the free Esys Launcher to code VIM on my F02 no problem, so I’ve used Esys before.

Wanted to know the cheapest/free option to code VIM in my G12 with iDrive 5 (version Y)?

From browsing this forum I have some idea about changing parameters in Esys and then doing the unlock sequence with the iDrive controller?

Step by step instructions on how to get the software and perform coding etc would be very much appreciated…

[jb2005]

You will not get step by step instructions on this forum. We encourage you to look for the search function. If you know how to enable the menu, you're already there.

[ishaqmir]

Thanks for the reply. My question is, do I just have to do the menu trick to activate VIM (all speeds) or do I also have to code it with Esys before attempting menu unlock?

[dubstar90]

@ ishaqmir, You have a PM

[jb2005]

Thanks for the reply. My question is, do I just have to do the menu trick to activate VIM (all speeds) or do I also have to code it with Esys before attempting menu unlock?

You have to code it first.

[krolig]

Thanks for the reply. My question is, do I just have to do the menu trick to activate VIM (all speeds) or do I also have to code it with Esys before attempting menu unlock?

first ypu need code HU

SPEEDLOCK_X_KMH_MAX 1F

SPEEDLOCK_X_KMH_MIN 3F
SPEEDLOCK_SPEEDVALUE_MAX 3F
SPEEDLOCK_SPEEDVALUE_MIN 1F
VIDEO_FRONT_LOCKED 00
VIDEO_HANDBRAKE 00
VIDEO_SPEEDLOCK_CONDITION None
SPEEDLOCK_FREISCHALTMENU active