Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW e93 coding issue
28-08-2016, 11:44 AM,
Post: #1
|
|||
|
|||
![]()
Hello,
I tryed to code my e93 335i today to folding roof while driving. I need to change GESCHWINDIGKEIT value (default werte_02 (00km/h) ) to 1eh (30km/h) I must code it via nettodata and I never did this. Can someone give me a quick how to do instuctions? Also I tryed to code my hazard lights to double blink. I have tryed to change the werte to werte_03 but it seems to not working. |
|||
28-08-2016, 15:16 PM,
Post: #2
|
|||
|
|||
RE: BMW e93 coding issue
CTM/CVM module in order to operate roof while driving (in motion):
The line that needs to be change is GESCHWINDIGKEIT default should be wert_02 (which is 00 km/h) After using NCSDummy you can change it to the following values 32 = 50km/h (which i think is way too high, but it's your call) 1eh = 30km/h 14h = 20km/h |
|||
28-08-2016, 16:54 PM,
Post: #3
|
|||
|
|||
RE: BMW e93 coding issue
(28-08-2016, 15:16 PM)snypertje Wrote: CTM/CVM module in order to operate roof while driving (in motion): Thanks for you reply, but its just copy past from monero1 post from e90forun. Also you can't change parameters like you change activr- nicht active choices. Also when I load trace file I only can choice 2 values. Thats why i need to do nettodata coding. |
|||
29-08-2016, 18:33 PM,
Post: #4
|
|||
|
|||
RE: BMW e93 coding issue
Use the NCSDummy and load the nettodat file to change the value.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content