Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ALC - adaptive light control repair
24-07-2017, 22:30 PM,
Post: #1
ALC - adaptive light control repair
Has anyone here repaired an ALC module from a E46 coupe or early E60 before? It is the small module behind the glove box. The module does not respond anymore, I am thinking that there is a power supply problem on the module (fuses were ok). There are 3 capacitors on the board. Might one be broken?
Quote this message in a reply
26-07-2017, 18:08 PM,
Post: #2
RE: ALC - adaptive light control repair
One of the chief problems for modules from that generation is cold joints caused by the lead free solder. You could test the capacitors, MOSFETS, resistors, etc with a multimeter and replace as necessary. Look for swollen electrolytic capacitors. People have had luck with reworking the boards with flux and a hot air station.
Quote this message in a reply
07-08-2017, 06:25 AM, (This post was last modified: 07-08-2017, 06:31 AM by cursor.)
Post: #3
RE: ALC - adaptive light control repair
Its problem with dual switching diode. It's supply motorola on board.
Originally is BAV70
I used BAV23C and work good

On foto i mark where is there diode


Attached Files Thumbnail(s)
   
Reputation: +7 - BimmerSLO [+1] , Krysiaman [+1] , inspi1981 [+1] , Vojno [+1] , tomushas [+1] , Czozen [+1] , Cowboy [+1]
Quote this message in a reply
[+] 25 users say Thank You to cursor for this post
23-11-2017, 20:34 PM,
Post: #4
XZBMW  RE: ALC - adaptive light control repair
Hello, how do you clean the lacquer from a pcb plate?

Best Regards.

AutoKodowanie - coding - programming - navigations - retrofit.
Quote this message in a reply
01-12-2017, 11:34 AM,
Post: #5
RE: ALC - adaptive light control repair
(23-11-2017, 20:34 PM)huzionet Wrote:  Hello, how do you clean the lacquer from a pcb plate?

I use "Sealant remover" from victor reinz.
Quote this message in a reply
[+] 2 users say Thank You to Vojno for this post
30-10-2018, 22:15 PM,
Post: #6
RE: ALC - adaptive light control repair
(07-08-2017, 06:25 AM)cursor Wrote:  Its problem with dual switching diode. It's supply motorola on board.
Originally is BAV70
I used BAV23C and work good

On foto i mark where is there diode

How much mA?? 125mA 225mA or 400mA?

Thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Fsc repair packet Wojti77 4 106 4 hours ago
Last Post: Thorsten
XZBMW F33 EPS repair pack FSC error RuleNormaliai 8 735 Yesterday, 12:59 PM
Last Post: Flash_W_88
  F20 cruise control retrofit maninblack 5 131 22-05-2024, 18:09 PM
Last Post: qbek90
XZBMW FSC repair pack need help HU_man 1 50 22-05-2024, 09:50 AM
Last Post: RaoulK1998
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 323 125,183 21-05-2024, 10:44 AM
Last Post: vld
  bmw kafas2 fsc repair kit robiukaz1 154 23,058 15-05-2024, 17:03 PM
Last Post: XALLECS
XZBMW Request KAFAS FSC repair pack miru75 75 8,868 15-05-2024, 17:01 PM
Last Post: XALLECS
XZBMW modifying the BMW x3 g01 light switch boweld11 4 239 15-05-2024, 11:20 AM
Last Post: kimz
  BMW E93 Roc repair eeprom Pedrom92 4 290 14-05-2024, 17:53 PM
Last Post: Superglider
XZBMW F12 - initializing used TMS module in Adaptive LED Semi14 9 346 08-05-2024, 19:03 PM
Last Post: Semi14

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content