[nn-sash]

Hello, Dears Friends! I have a car X1 F48 2.0i F056. The native unit BDC is completely destroyed, I can read only eeprom 95256. There is used from car ( BDC i level F025-15-03-503) With the help VVDI2 I changed vin and prescribed a new key. But FA is old!!! The car turns on the ignition, but does not start.

1)How i can to restore FA and program used BDC .
2)Need change I-level BDC.

I have ENET(e-sys), vvdi bmw tool. (have no icom).

Thanks for help!!!

[Tombo]

Vvdi bmw cant do it???
What for is that tool?
If you have any communication to old unit u should be able to red VO. Last time I had only communication to BDC_gateway and backed up vo. Of course different tool...

[nn-sash]

Tombo VVDI BMW tool it is not yet finished product. It can encode and program blocks online. But on this machine just comes out with an error. The old unit is not read, it is damaged.

[simaservis1108]

FA is not the problem.
ISN ECU and ISN EGS is the problem and with the old unit dead best solution would be to order new part.

[nn-sash]

VIN ISN key data it's all in the BDC. By VIN I did FA. The starter is not spinning, only includes the ignition. How to properly encode in e-sys car??

[willisodhiambo]

I don't get you. You have a used BDC. Old BDC is dead. How did you match old SK to new BDC? Nowhere in your post have you mentioned ISN/SK so I wonder how this car is supposed to start. Explain in detail exactly what you have done. There is no way this car can start by just making key and changing vin. why are you making key? Used BDC had no key? FA/VO is not the issue bro!

[nn-sash]

Sorry, Willisodhiambo you are right I didn't write
VVDI can change BDC data(FA ISK VIN Key). I did it. ISK i read from DME. SK counted a new, by ISK(vvdi do this auto). I did new key because used BDC have no work key. But FA i did from other car F48. Now car no start (only ignition) and have some error about coding FA. I need to coding and program BDC.(i think).

[nn-sash]

Dear this car has ELV. To start need to programm it.

[Siki78]

Sorry, Willisodhiambo you are right I didn't write
VVDI can change BDC data(FA ISK VIN Key). I did it. ISK i read from DME. SK counted a new, by ISK(vvdi do this auto). I did new key because used BDC have no work key. But FA i did from other car F48. Now car no start (only ignition) and have some error about coding FA. I need to coding and program BDC.(i think).

Stupid question but did you inject cafd and VO code BDC? Write new svt to bdc