Possibly Related Threads…

***Sedoy*** · 02-04-2022, 13:15 PM,

(01-04-2022, 18:33 PM)bereic Wrote: @jogi8850

do you know why also in this release the SSP's for front and taillights on a new X3 G01 LCI are not available?
My dealer checked for me before last week in this same version and there they were available. But here not.

Thank you

Without VIN or logfiles no help.

***bereic*** · 02-04-2022, 13:40 PM,

(02-04-2022, 13:15 PM)Sedoy Wrote:
(01-04-2022, 18:33 PM)bereic Wrote: @jogi8850

do you know why also in this release the SSP's for front and taillights on a new X3 G01 LCI are not available?
My dealer checked for me before last week in this same version and there they were available. But here not.

Thank you

Without VIN or logfiles no help.

sent you the vin by PM.
If you need logs, please let me know where to find them.
Thx a lot.

***b.nurzaman*** · 02-04-2022, 15:12 PM,

why its didn't identify correctly say (UNBEK) ?

***Sedoy*** · 02-04-2022, 15:28 PM,

(02-04-2022, 15:12 PM)b.nurzaman Wrote: why its didn't identify correctly say (UNBEK) ?

You need to set your D-Can Adapter to K-Line. But I'm not sure that it works with E46.

***maninblack*** · 02-04-2022, 19:54 PM,

is there a way to check, if data transfer to bmw is really disabled?

***b.nurzaman*** · 03-04-2022, 00:26 AM,

(02-04-2022, 15:28 PM)Sedoy Wrote:
(02-04-2022, 15:12 PM)b.nurzaman Wrote: why its didn't identify correctly say (UNBEK) ?

You need to set your D-Can Adapter to K-Line. But I'm not sure that it works with E46.

by connecting pins 7 and 8? or separate pins 7 and 8? mine is pin 7 and 8 already connected

***kn6600*** · (This post was last modified: 03-04-2022, 09:07 AM by kn6600.)

(03-04-2022, 00:26 AM)b.nurzaman Wrote:
(02-04-2022, 15:28 PM)Sedoy Wrote:
(02-04-2022, 15:12 PM)b.nurzaman Wrote: why its didn't identify correctly say (UNBEK) ?

You need to set your D-Can Adapter to K-Line. But I'm not sure that it works with E46.

by connecting pins 7 and 8? or separate pins 7 and 8? mine is pin 7 and 8 already connected

For E46 / K-Line pin 7 and 8 must be connected. set communication to 100kbit/s in k+dcan utility.

***maninblack*** · 03-04-2022, 15:26 PM,

Is there a way to check if alle data (SDP) is correct installed without a car?

Even if i delete the whole data_swi folder, ista starts without an error.
an i have no car here to connect and check

04-04-2022, 09:32 AM,

Is there newer ICOM firmware set up (Boot and application file) available than 03-15-04.

With BMW_ISPI intaller it didnt update my ICOM or is there special process for that?

***Bimmer540*** · (This post was last modified: 04-04-2022, 12:18 PM by Bimmer540.)

(04-04-2022, 09:32 AM)harrison Wrote: Is there newer ICOM firmware set up (Boot and application file) available than 03-15-04.

With BMW_ISPI intaller it didnt update my ICOM or is there special process for that?

After installing .msi you must update icom with ista

And there is newer on the forum then 03-15-04

https://cartechnology.co.uk/showthread.php?tid=58917

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ISTA issues on G05 X5	330d	6	125	2 hours ago Last Post: Stratofortress
	ISTA Standalone Licenserequest up to v4.37.4x	Sedoy	8,769	703,137	4 hours ago Last Post: Sedoy
	ISTA 4.33.30 The programming system could not be initialised	Edward1968	40	8,488	Yesterday, 09:50 AM Last Post: iyade46
	need lastest copy of PSdZData_Lite	iyade46	1	55	Yesterday, 07:42 AM Last Post: Edward1968
	ISTA 4.46.xx problems and possible solution	Sedoy	131	16,219	31-05-2024, 13:32 PM Last Post: CATAHA
	Update ISTA at once 4.43.40 (ISTA Update Program)	charlesjyw	42	8,820	30-05-2024, 19:52 PM Last Post: mars13
	ISTA+ 4.47.3x Install Files - MEGA	shawnsheridan	11	1,850	29-05-2024, 04:50 AM Last Post: ivanp
	Lowering g05 lci with ista	Zenel6GT	16	760	28-05-2024, 12:59 PM Last Post: NeRkO20
	ISTA 4.47 programming N/A	Neon10	7	486	28-05-2024, 07:46 AM Last Post: Thomas77
	ISTA 4.46.30 can't finish the diagnosis	spiridon	1	216	28-05-2024, 07:32 AM Last Post: flterence

Contact Us