Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ICOM (NEXT) D infos
27-07-2018, 09:27 AM,
Post: #1
|
|||
|
|||
ICOM (NEXT) D infos
|
|||
28-07-2018, 20:50 PM,
Post: #2
|
|||
|
|||
RE: ICOM (NEXT) D infos
I measured and the cable with marked "10" is the KL15,
so if I connect to the (B+) then the ICOM see the ignition and can measured as well! I do't need this adapter: but the other two are cables connected to the same number as it marked on the round connector! (CAN-HIGH number "7" and CAN-LOW number "9") but for what? |
|||
09-10-2018, 21:02 PM,
Post: #3
|
|||
|
|||
RE: ICOM (NEXT) D infos
older bike like with engine ecu bosch motronic with 3pin connector
|
|||
11-10-2018, 10:20 AM,
Post: #4
|
|||
|
|||
RE: ICOM (NEXT) D infos
|
|||
11-10-2018, 19:07 PM,
Post: #5
|
|||
|
|||
RE: ICOM (NEXT) D infos
search for 83302364732 adapter for MA2.4
|
|||
Reputation: +1 - zeromoto [+1] | |||
12-10-2018, 09:50 AM,
Post: #6
|
|||
|
|||
RE: ICOM (NEXT) D infos
Yes, I know that, I have it. This is for preseries with this round diag connector.
But for MA2.2 need the ICOM-E. This is for 3 pin. The original question is what is the three connectors in ICOM-D? |
|||
22-10-2018, 11:22 AM,
Post: #7
|
|||
|
|||
RE: ICOM (NEXT) D infos
(12-10-2018, 09:50 AM)Vojno Wrote: Yes, I know that, I have it. This is for preseries with this round diag connector. Maybe they are used for connecting to the CAN network and intercepting the CAN messages between modules for analysis. Of course with some additional external tools. Needs to be tested because I think that BMW DME is isolating the CAN messages between modules and diagnostic connector. BTW, you mentioned that you have the 83302364732 adapter. Does this adapter have electronics inside or only wires. Can you measure and post the pinout? I know what it should be doing but I have never seen one genuine BMW to confirm my findings. |
|||
22-10-2018, 17:47 PM,
Post: #8
|
|||
|
|||
RE: ICOM (NEXT) D infos
The 83302364732 cable have no electronic inside, only 1-1 wires except only the pin 10.
|
|||
27-03-2019, 14:16 PM,
Post: #9
|
|||
|
|||
RE: ICOM (NEXT) D infos
is anybody using china icom D connectecd to original icom next ?
|
|||
31-03-2019, 17:27 PM,
Post: #10
|
|||
|
|||
RE: ICOM (NEXT) D infos
(27-03-2019, 14:16 PM)haty Wrote: is anybody using china icom D connectecd to original icom next ? With or without electronic inside in ICOM-D? Because I have both! The point is that without electronic can you use only with ISTA-D or INPA not for ISTA-P and E-sys! Vojnó
Press Thanks and reputation if this post helped you. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ICOM E schematics | autoraedarum | 4 | 1,640 |
05-10-2022, 23:18 PM Last Post: oskapage |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content