[atomantmk]

Remote connect tool is missing in C:\BimmerUtility or I'm blind and didn't saw?

[Rob@BU]

BimmerUtility v1.0.44 is LIVE!


CAFD Mapping Updated to 4.38.30 (LATEST)
Introducing BU Remote Connect! (C:/BimmerUtility/)
Introducing SVT Compare!
Cheat Codes Automatically Update when File is Changed.
Bug Fixes
Performance Enhancements

[pengshengshi]

“Cheat Codes Automatically Update when File is Changed..” 

V1.0.44 is still invalid. It is recommended to check and repair it,
It is recommended to edit FA and preview new changes, as shown in the figure below

[maxwell4321]

Eventually found Remote Connect but why is it hidden and not an option in the BU menu ?

Bit more instruction if you don't mind....

Start what VPN ? Does this mean you have one hidden somewhere or just use Hamachi or similar as we normally would ?
What connections work ENET, Icom or both ?

Thanks

[pengshengshi]

Use SVT COMPARE to load FA_ After 000000 1 calculation,
When I change to FA_ 0000002,
FA is still displayed_ The calculation result of 0000001,
The reset key is invalid. You must restart BU and reload FA_ 00000 2 can work normally

[MichaelNRW]

Hey Rob
i just had a look at the SVT Compare but it doesn´t work for me.
I used the SVT_Ist and compared it to a new FA where i removed 32X.
BU loads for some time but then don´t show any results.
I already know the values but wanted to verify the new feature.

Another thing about the NCD compare feature.
Could you add an button to reset the window?
I´m trying to compare multiple NCDs but have to click OK when loading the new NCD 1 file because it´s not the same as NCD 2.
A reset button would be higly appreciated.

Thanks!

[shawnsheridan]

Eventually found Remote Connect but why is it hidden and not an option in the BU menu ?

Bit more instruction if you don't mind....

Start what VPN ? Does this mean you have one hidden somewhere or just use Hamachi or similar as we normally would ?
What connections work ENET, Icom or both ?

Thanks

Why would it be on BU Menu when it must dragged to and executed from Remote PC?

Works with Any VPN, e.g. Hamachi, YemaViewer, etc.

Ports 50160 for ICOM and 6801 for ENET are Forwarded.

[MichaelNRW]

I found another issue that may be because the mapping for 4.38.30 is incomplete.
Yesterday i flashed my car to 22-11-531 with PSdZdata 4.38.30.
Today i made the NCD compare for every ECU to see changes by the update and what i had already coded.
This worked for most of the ECUs but some couldn´t be recognized by BU and the NCD compare failed.
Examble:
DKOMBI4
Old: CAFD_00004508_006_000_101.ncd => shown as DKOMBI4
New: CAFD_00004508_007_000_009.ncd => shown as CAFD_00004508_007_000_009.ncd
It´s the same CAF but BU doesn´t let me compare them.

Cheers!

[DayvG]

I found another issue that may be because the mapping for 4.38.30 is incomplete.
Yesterday i flashed my car to 22-11-531 with PSdZdata 4.38.30.
Today i made the NCD compare for every ECU to see changes by the update and what i had already coded.
This worked for most of the ECUs but some couldn´t be recognized by BU and the NCD compare failed.
Examble:
DKOMBI4
Old: CAFD_00004508_006_000_101.ncd => shown as DKOMBI4
New: CAFD_00004508_007_000_009.ncd => shown as CAFD_00004508_007_000_009.ncd
It´s the same CAF but BU doesn´t let me compare them.

Cheers!

Can you post the CAFD that doesn’t map please.

[MichaelNRW]

Can you post the CAFD that doesn’t map please.