Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ 2018 X3 (G01) ENTRYNAV2 larger screen
22-11-2022, 15:41 PM,
Post: #1
|
|||
|
|||
2018 X3 (G01) ENTRYNAV2 larger screen
Hi guys,
I'd like to know whether it is possible to retrofit a larger screen into a BMW X3 (G01 made in 2018) with HU_ENTRYNAV2 head unit. The car has business (basic) navigation with the small 6.5" screen. According to posts on the internet, people were successful in coding a 8.8" screen (part no. 6820396), however this screen does not fit into the dash (despite being marked as compatible with the G01 on realoem.com). This screen is for the G30. There's a larger 10.25" screen available for the X3 (part no. 8715335) that fits the dash, but always gets a "No Signal" message when coded with eSys. So this screen works only with the EVO head unit with navigation professional. There's a thread here in which someone had success with HU_ENTRYNAV2 and the 10.25" screen on an X1 - supposedly the screen has a lower resolution (1280x480 vs 1440x540)? https://cartechnology.co.uk/showthread.p...172&page=2 Thanks for any info! |
|||
23-11-2022, 12:05 PM,
Post: #2
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
Hi
In your case can use larger display only with 8.8" screen. 10.25" will not work with hu entrynav2. |
|||
23-11-2022, 13:03 PM,
Post: #3
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
try code with VO
|
|||
23-11-2022, 17:05 PM,
Post: #4
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
It will not work, you need full evo kit in order to have bigger screen.
Don’t forget to give Thanks & Rep if my post helped you!!!
|
|||
23-11-2022, 19:50 PM,
Post: #5
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
|
|||
24-11-2022, 19:10 PM,
Post: #6
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
Partnr : 8720749
This screen 8.8' will work with G01 with Entrynav2, done several times. 10.25 from evo will not work |
|||
24-11-2022, 19:55 PM,
Post: #7
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
|
|||
24-11-2022, 21:26 PM,
Post: #8
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
Thanks, I've found that part no. by accident when searching eBay last week and have ordered it already. Should get it some time next week.
What's strange is that the screen cannot be found on realoem.com, the official BMW OEM catalog... Can you please write what FDL values I should change? EDIT: I've found these values somewhere on other sites: I should update these: - DISPLAY_VARIANTE - CID_DISPLAY_RES - CID_DISPLAY_SIZE These should already be set to the correct values, right? - CID_APIX_MODE -> apix2 - CID_COLOR_DEPTH -> 24 - CID_COM_MODE -> mii These are not needed: - CID_RESOLUTION - DIMMUNGSVARIANTE PS: Does ENTRYNAV2 support touch? The screen should be touch-enabled so I just need to enable these 2 values? CID_TOUCH -> active CID_HMI_TOUCH -> active Thanks! |
|||
24-11-2022, 21:58 PM,
Post: #9
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
(24-11-2022, 21:26 PM)markodsk Wrote: Thanks, I've found that part no. by accident when searching eBay last week and have ordered it already. Should get it some time next week. 8.8 CID_DISPLAY_RES: 1280_480 [02] CID_DISPLAY_SIZE: 8_8 [03] CID_DISP_AR: ratio_1_00 [0F] CID_HMI_TOUCH: aktiv [01] CID_TOUCH: aktiv [01] DISPLAY_SIZE_RESOLUTION: 8.8_1280x480 [01] DISPLAY_VARIANTE: breites_display [02] BMW tuning & retrofitting, https://www.instagram.com/cebepspb/
* lifetime EVO, ROUTE codes, Carplay, ECU Remap and other crap |
|||
24-11-2022, 22:18 PM,
Post: #10
|
|||
|
|||
RE: 2018 X3 (G01) ENTRYNAV2 larger screen
Thanks, I'll report back after I get the screen and do the retrofit
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content