Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Swirl Flap delete
05-03-2024, 22:06 PM,
Post: #1
|
|||
|
|||
Swirl Flap delete
Hi,
BMW 435d 2015 A few months ago I got a swirl flap error, a local garage wanted to just replace the whole intake (flaps seem to move freely). The local dealer said they would upgrade the modules and then wanted to do a full diag instead before updating. This lead me to installing ISTA+ replacing the actuator updating the modules and adaption reset. Car has been ok for a couple of days then loss of power again. I haven't had time to check for errors yet. Removed the actuator and jammed the flap open for the interim. I will remove the intake on Friday and inspect along with cleaning and blasting. I do have a delete kit but possibly only going to keep the car another year.
Any idea's will be gratefully appreciated |
|||
06-03-2024, 06:21 AM,
Post: #2
|
|||
|
|||
RE: Swirl Flap delete
Your post is a bit unclear.. Do you have orginal and only upadated firmware in ecu?? If yes post dtc from ecu.
For my sound like flaps problem, not flaps motor. Best way if you have kit, remove flaps and off it in ecu. You writed about stage1, but previously you wonder to delete flaps becouse going keep car for year only???? |
|||
06-03-2024, 22:47 PM,
Post: #3
|
|||
|
|||
RE: Swirl Flap delete
[quote="sivyx" pid='674347' dateline='1709706112']
Your post is a bit unclear.. Do you have orginal and only upadated firmware in ecu?? If yes post dtc from ecu. For my sound like flaps problem, not flaps motor. Best way if you have kit, remove flaps and off it in ecu. You writed about stage1, but previously you wonder to delete flaps becouse going keep car for year only???? [/quote No I replaced the actuator when I first got the issue, thank you I will inspect the intake and see if any new dtc since issue reoccurred and post. Ok if I am going to remove intake and inspect and clean will use the delete kit. What would be the best way of going about off it in ecu? Stage1 was more if I am going to delete flaps and then get a tune to try and smooth out bottom end then might as well upgrade to stage 1 guessing can get away with new intercooler and air filter to go stage 1. In two minds as if decide not to keep car guessing it will be easier to sell as standard. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Hyundai i40 EDC17C08 DPF OFF + FLAP OFF | mialczek | 2 | 47 |
Today, 02:31 AM Last Post: mialczek |
|
Mercedes Sprinter CRD2 egr delete | cawadany | 3 | 100 |
01-06-2024, 12:00 PM Last Post: 57Tuning |
|
EGR DELETE GOLF V | Black Alien | 2 | 93 |
27-05-2024, 09:00 AM Last Post: Jurebv |
|
HELP MAZDA CX3 DPF EGR DELETE | anto | 1 | 53 |
27-05-2024, 07:40 AM Last Post: anto |
|
MAZDA CX3 DPF EGR DELETE | Black Alien | 1 | 53 |
24-05-2024, 15:44 PM Last Post: rece1p23 |
|
Chevrolet Orlando dpf egr delete please | kojoantwi | 1 | 73 |
19-05-2024, 08:45 AM Last Post: CenturionM |
|
bmw ms42 cat/lambda delete | florinu | 2 | 91 |
17-05-2024, 20:54 PM Last Post: florinu |
|
Benz ML with ME2.0 CAT delete | kojoantwi | 0 | 44 |
17-05-2024, 12:55 PM Last Post: kojoantwi |
|
Opel Vectra C Simtec8.1 swirl flaps off | viytik | 0 | 54 |
15-05-2024, 08:11 AM Last Post: viytik |
|
EGR and DPF delete needed | zijad77 | 6 | 311 |
03-05-2024, 10:04 AM Last Post: zijad77 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content