[ivannw]

Hi guys, I'm doing a PDC retrofit on my f20 and after plug cables I saw faults on ISTA. The sensors status are Programming.

Is there a way to program them and/or initialize.

Thanks in advance.


Enviado do meu iPhone usando Tapatalk

you need to install new REM

It's new. All pins are there.


Enviado do meu iPhone usando Tapatalk

[UD_David]

Dear ivannw,
I still wonder whether you have fixed your problems? However, in my knowledge, you have to change FA to let the whole system know that you have that option?

Thanks for answering, David.

I tried everything. Added 507 to FA and coded icm, rem, fem and I fdl coded the nbt.

It's clear on ISTA/D that one sensor couldn't be programmed. I changed the position and ISTA detects the same error on the new position.

I saw a video on YouTube that a guy reset PDCs with a maxidiag from autel. Maybe it's possible.

I'm thinking to buy a used sensor here in Brazil to test if it will work.

A new pdc here in Brazil costs R$ 1.7K ~ USD 520. Very overpriced.


Enviado do meu iPhone usando Tapatalk

everything supposed to do has been done already, i think the problem came from the part. Besides, I have time to works with Maxidiag and maxisys from Autel, everything is supposed to be the same as the original software in exact position somehow. However, i just took a look on the manual, the ultrasonic sensor is no need to anything when replacing. --> Maybe problems are coming from the part.