[mall]

Hi all,

I have this car and I can see that it is so much higher than I would like, specially in the front axle.

I have done a test with Rheingold and adjust setting but it is still too higher. I set a different values for front axle (I say to rheingold that it is tall than I did measure but nothing change).

The rear axle I can change value.

When I am trying to do a setting, rheingold says to me that higher should be 642 in the front and 644 for the rear axle.

Is there any way to change thoses values? How I can put lower front axle?

Thanks in advance

[olaf]

Since the F11 has air springs only on the rear, you can not adjust the front because is fitted with steel springs...