[spider80]

spider80 you might want to include those two lines in the upcoming releases. In any case keep up the good work.

I do not put these lines into the regfix in the standalone, so people can update BLP and SDP independently through ista launcher console.
I do this only in a full torrent releases.

[DICKHILL]

Open the Reg file with Notepad and add these 2 lines.

"LogisticBaseVersion" = "4.09.20" 
"SWIData" = "4.09.20" 

As mentioned multiple times, this solution works... - THANKS!
But it would have been nice to know where to insert it... (:

So to others who doesn't know it, it can be added/inserted under/in:
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]

[Stromag]

Open the Reg file with Notepad and add these 2 lines.

"LogisticBaseVersion" = "4.09.20" 
"SWIData" = "4.09.20" 

As mentioned multiple times, this solution works... - THANKS!
But it would have been nice to know where to insert it... (:

So to others who doesn't know it, it can be added/inserted under/in:
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]

Well in the Reg x64 and or in the Reg x86, with a clear view you can see where it goes ..

[DICKHILL]

Open the Reg file with Notepad and add these 2 lines.

"LogisticBaseVersion" = "4.09.20" 
"SWIData" = "4.09.20" 

As mentioned multiple times, this solution works... - THANKS!
But it would have been nice to know where to insert it... (:

So to others who doesn't know it, it can be added/inserted under/in:
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]

Well in the Reg x64 and or in the Reg x86, with a clear view you can see where it goes ..

Now when I know it, I can... Yes... (o:
(But if I knew it, I wouldn't have pointed it out...)

"add" usually means adding at the end of the file, but you're right that it's quite logical that it should be added at same location as the other versions. (:

[hero3838]

Have error as photo

[SweetBMW]

Have error as photo

you have incorrect sqlitedb version files in your folder. either use the correct ones or maybe you have one old and some new mixed together.

[hero3838]

Have error as photo

you have incorrect sqlitedb version files in your folder. either use the correct ones or maybe you have one old and some new mixed together.

Problem was regedit in correct windows 64 bit but i used 32 bit after correct regedit error goes off.
But know another error ;
" The programing system could not be initilaised.The ISTA installation may be damaged or incorrectly configured.Reinstall ISTA if problem persist,contact local support."

[SweetBMW]

Økonomi registry. Find ista and set programming to false


Sent from my iPhone using Tapatalk

[frederikjensen]

Hello I have a problem with ista on a Bmw e46 and e83 x3 when I try to read out the vehicle it says it can’t find the vehicle or something like that and so I have to input the vin number manual but then it can only find the DDE module and all the other is not communicating. But when I then try on a Bmw e61 there is no problem and I can read out the vehicle. Do anyone know what’s wrong. Is it because pins 7-8 is not connected I have heard something about that but I just want to be safe before I buy one with a switch on. Hope someone can help me

[spider80]

Have error as photo

you have incorrect sqlitedb version files in your folder. either use the correct ones or maybe you have one old and some new mixed together.

Problem was regedit in correct windows 64 bit but i used 32 bit after correct regedit error goes off.
But know another error ;
" The programing system could not be initilaised.The ISTA installation may be damaged or incorrectly configured.Reinstall ISTA if problem persist,contact local support."

Add to your reg fix next:
For x64:
[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]
"LogisticBaseVersion"="4.09.20"
"SWIData"="4.09.20"

For x86:
[HKEY_LOCAL_MACHINE\SOFTWARE\BMWGroup\ISPI\ISTA]
"LogisticBaseVersion"="4.09.20"
"SWIData"="4.09.20"