[crazyiven]

Hi Guys!

Thanks for your great work . Is there a Link/Torrent just for the PSDZData Files? My car got updated today and I only have 56.0 ... but i cant code FEM_BODY with 56.0 due to I Level Change

If someone has just the PSDZdata that would be very nice

Kind regards
Marcus

[ATC]

Thank you guys, it was wrong installation, I am stupid I didn´t read that the installation was unsuccessful

Don't worry.

First, before running the update, you must put the original files that you have modified (ConfigurationSettings.xml, TaurusClientConfig.xml, NewSessionServerMode.xml, etc, etc). Otherwise you will again fail the update.

To check update was successful, go to the following path.

C:\ProgramData\BMW\ISPI\config\TRIC\ISTA-P\Fingerprints

and verify that these files exist.

ISTA-P_3.56.0.500.ok
ISTA-P_3.56.1.002.ok

BR.
ATC

Great!
Can you upload me these original files please, I have only modified

my C:\ProgramData\BMW\ISPI\config\TRIC\ISTA-P\Fingerprints
ISTA-P_3.56.0.500.ok
ISTA-P_3.56.1.002.error

OK no problem.

They are here.
Find them and replace them with the ones in the ZIP file


BR
ATC

few versions back I edited only these files for original icom...

1) \apps\wsm\apps\agent\data\DeviceInventory-ICOMXXXXXXX.xml
2) \apps\wsm\apps\agent\data\UnitRegistration-ICOMXXXXXXX.xml

nothing more I think

I understand nothing.

In ISPI Next system, ISTA/P application is not required to register any ICOM.
The files you indicate, are ONLY necessary for older system ISTA/P.

Please, in which system you are trying to do the UPDATE?

BR
ATC

[Cybertronic]

Could someone send me this file please? From the 56.0 install? I dont know why mine is showing up as tampered with.
BMW/Environment/JavaVM/bin/client/classes.jsa

[ipcsr76]

It work correctly for me !
Thank you.

[petkowo]

Don't worry.

First, before running the update, you must put the original files that you have modified (ConfigurationSettings.xml, TaurusClientConfig.xml, NewSessionServerMode.xml, etc, etc). Otherwise you will again fail the update.

To check update was successful, go to the following path.

C:\ProgramData\BMW\ISPI\config\TRIC\ISTA-P\Fingerprints

and verify that these files exist.

ISTA-P_3.56.0.500.ok
ISTA-P_3.56.1.002.ok

BR.
ATC

Great!
Can you upload me these original files please, I have only modified

my C:\ProgramData\BMW\ISPI\config\TRIC\ISTA-P\Fingerprints
ISTA-P_3.56.0.500.ok
ISTA-P_3.56.1.002.error

OK no problem.

They are here.
Find them and replace them with the ones in the ZIP file


BR
ATC

few versions back I edited only these files for original icom...

1) \apps\wsm\apps\agent\data\DeviceInventory-ICOMXXXXXXX.xml
2) \apps\wsm\apps\agent\data\UnitRegistration-ICOMXXXXXXX.xml

nothing more I think

I understand nothing.

In ISPI Next system, ISTA/P application is not required to register any ICOM.
The files you indicate, are ONLY necessary for older system ISTA/P.

Please, in which system you are trying to do the UPDATE?

BR
ATC

unfortunately windows 8.1 64bit

[ATC]

I understand nothing.

In ISPI Next system, ISTA/P application is not required to register any ICOM.
The files you indicate, are ONLY necessary for older system ISTA/P.

Please, in which system you are trying to do the UPDATE?

BR
ATC

unfortunately windows 8.1 64bit

It has nothing to do with it.
I also have Win 8.1 x64 and everything works properly.

I think you have mixed the concepts.

Uninstall everything you have of ISTA-P.
Make a clean installation 56.0 (without changing anything)
After, upgrading to 56.1

When you're done with all, tell me and continued helping you.

BR
ATC

[c1145106316]

First, before running the update, you must put the original files that you have modified (ConfigurationSettings.xml, TaurusClientConfig.xml, NewSessionServerMode.xml, etc, etc). Otherwise you will again fail the update
With the change of path?

[winter]

I get when starting ISTA / P this error?

please check your computer RAM Minimum 4 GB and CPU Minimum DualCore with 1.75 GHz.

[autoraedarum]

Mine works with 3GB RAM

[starML]

Edit HW requirements *.MSI (installer) using with a free program SuperOrca. The question is, how much computer's system resources will be available for coding and programming. Why install this software on slight computer?