[Joda]

HI!
I have a VW Passat 2.0TDI CBAB engine year 2008 in my garage.
The car have many problems what are actually solved but the one DTC P2015
is still there.

The car had a bad throttle actuator motor which is changed with new one.
But in the same time when the car was on diag I saw the error P2015-intake manifold damper sensor, implausable signal.

I checked for the 5V reference from the ecu which is ok.
Also checked for the motor powering wiring and voltage all is ok.
Also checked for the sensor output signal to the ecu which is also ok.

Conclusion does actually the Intake Manifold Runner Control which part number is
03L 129 086 V120 is working and in a good condition.
Could it be does the problem is inside the intake manifold?

Whenever I erase the DTC the code is coming back again.

There are also a "Particle filter overloaded" error and "Air mass flow during regeneration, to high" error.

Any suggestion pleas...

Thanks
My best regards.