Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xprog programming device silent error
16-02-2018, 23:03 PM,
(This post was last modified: 16-02-2018, 23:06 PM by dil6222.)
Post: #1
|
|||
|
|||
Xprog programming device silent error
Hello all messed about with my xprog removed original atmega and hotair another atmega on so I could program it programmed verify etc ok.
Then when I soldered back my original atmega there was loud pop from somewhere the only place I can guess is the 11mhz crystal or 4.7pf capacitor is only thing that's near. Tryed it and xprog gives device silent error I tried to reprogram atmega but wouldn't program verify errors so i soldered new one on and programmed OK so maybe was MCU that went pop unsure lol. Now when I plug in my xprog and try to read any chip I get device silent error still and no LEDs on xprog lightup i can reprogram atmega no problems but still same device silent error. Any ideas ? Maybe 4.7pf cap or 11.0592 crystal just below MCU ? If mine or others posts and info are helpful please give thanks/rep
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content