Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
<< Perfekt Toolbox 0.2b >> e6X/e7X/e8X/e9X Cluster Tool
22-08-2018, 12:25 PM,
Post: #16
|
|||
|
|||
RE: << Perfekt Toolbox 0.1a >> e6X/e7X/e8X/e9X Cluster Tool
(22-08-2018, 12:12 PM)inotherwords Wrote:(22-08-2018, 11:52 AM)dommeij Wrote:310 km/h means that it was not coded. Show the values you have entered(22-08-2018, 11:02 AM)inotherwords Wrote:(22-08-2018, 10:19 AM)dommeij Wrote: Doesn't work 100%... i've got an 300km/h speedometer an when I try to change it to max 260km/h (just for a test, with the numbers of your screenshot) it says coding ok. But my needle is moving like in a 300km/h speedometer... Could you help me? No, it shows 310km/h in the ECU Information coded on 310km/h. After coding on 260km/h it shows max 260km/h. So everything is fine there. Here are my original values of the speedometer: Start position offset (steps): 61 Damping factor: 6 Effective (real) speed (km/h): 0.0 / 7.5 / 46.8 / 115.6 / 295.2 Displaying speed (km/h): 0.0 / 10.0 / 50.0 / 120.0 / 310.0 Motor steps: 0 / 290 / 1450 / 3480 / 7153 These are the max. 260km/h values I entered: Start position offset (steps): 32 Damping factor: 3 Effective (real) speed (km/h): 0.0 / 7.8 / 47.1 / 116.0 / 250.0 Displaying speed (km/h): 0.0 / 10.0 / 50.0 / 120.0 / 260.0 Motor steps: 0 / 177 / 888 / 2133 / 4622 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
11 Guest(s)
11 Guest(s)
Return to TopReturn to Content