Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Damaged the EEPROM 95128 in FEM
08-04-2024, 14:25 PM,
Post: #7
RE: Damaged the EEPROM 95128 in FEM
(08-04-2024, 07:14 AM)wxwwxw Wrote:  I had a FEM+ Key assembled on a table with a start-stop button and a coil.

I damaged the EEPROM in FEM. But as it turned out, the key memory is not stored in 95128. The old key turns on the ignition

The WUP is in the eeprom for key detection


Quote this message in a reply


Messages In This Thread
Damaged the EEPROM 95128 in FEM - by wxwwxw - 31-03-2024, 13:49 PM
RE: Damaged the EEPROM 95128 in FEM - by DSESET86 - 31-03-2024, 16:01 PM
RE: Damaged the EEPROM 95128 in FEM - by wxwwxw - 02-04-2024, 18:23 PM
RE: Damaged the EEPROM 95128 in FEM - by DSESET86 - 03-04-2024, 04:25 AM
RE: Damaged the EEPROM 95128 in FEM - by Jumper - 05-04-2024, 20:40 PM
RE: Damaged the EEPROM 95128 in FEM - by wxwwxw - 08-04-2024, 07:14 AM
RE: Damaged the EEPROM 95128 in FEM - by Jumper - 08-04-2024, 14:25 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW MD1/MG1 ISN Extractor from EEPROM Dump Czozen 37 8,129 Yesterday, 04:22 AM
Last Post: ultimate
XZBMW Bmw g30 atm damaged water redog4dy 13 428 17-05-2024, 20:52 PM
Last Post: redog4dy
  BMW E93 Roc repair eeprom Pedrom92 4 286 14-05-2024, 17:53 PM
Last Post: Superglider
  E85 cluster eeprom VIN location stydly 3 155 08-05-2024, 19:47 PM
Last Post: gabur431
XZBMW CAS2 TO CAS3 EEPROM DEJMIEN 9 304 28-04-2024, 05:58 AM
Last Post: 16eddi67
  F10 FRM III eeprom needed for repair claw 0 93 19-04-2024, 16:16 PM
Last Post: claw
XZBMW BMW 420i B48 (2018) EEPROM/full dump lagunasec 2 179 17-04-2024, 17:07 PM
Last Post: lagunasec
  Eeprom dump needed for EHC E60 Matthew53 0 87 15-04-2024, 22:27 PM
Last Post: Matthew53
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,604 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW Tool for 35160 eeprom Emmy67 19 2,996 28-02-2024, 13:44 PM
Last Post: Adekborys69

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content