[bmw_freak96]

Hello.

I´ve installed a cic from an e90 in my e60.
At a few sites I read that A0 and 63 can stay at e90 zusb and only 62 has to be flashed to e60 zusb.

Actually adress 63 is 9283418 and A0 ist 9284329 (both E90 software).
I would like to flash adress 62 from 9284327 (E90) to 9273169 (E60) using WinKFP, icom clone and most_async_ab625.
If i do so, the cic won´t get out of the bootloader. WinKFP says programming ok but the bootloader doesn´t disappear.

If I flash adress 62 back to the e90 zusb 9284327 the cic is booting and working normally.

I´ve also tried to flash the cic completely to e60 zusb.
At first 63 to 9273158.
Then 62 to 9273169. Now it stuck at the bootloader again.
So I can´t flash A0 to 9273189 (error 201), i have to flash it all back to E90 that it is working.

What am i doing wrong? Please help

thanks.