[jambo1uk]

Hi all I'm Jamie I am trying to get a non starter working
the van we think has been ran on some veg oil or bio I'm unsure so cant say what it was heres what I have done so far:

dropped the tank and cleaned it and the lift pump
removed and cleaned the injectors
replaced timing belt
removed cleaned and replaced the fuel filter
fuel is getting to the injectors as I have clear pipe from filter to pump and on the spill pipes
it turns over and sounds like it wants to go but just dosent go
I have a china box and Delphi 2014.1
it has :
cam sync
engine rpm 160
fuel pressure measured 289 bar
overboost pressure measured 965 millibar
target overboost pressure 1246 millibar

I have asked on other forums and at the moment I'm told the rpm is to low and needs to be above 200 rpm I have tried 3 different starters (non new) and 2 run at 160 and the other is low what I want to know is in your opinions what you think it may be should I go try another starter as I cant find what rpm it should spin at anywhere or is it something else as it don't sound slow turning over thanks for any replies I'm desperate to get this going.