Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
K-tag and china bdm100 adapters-experience
|
30-03-2017, 20:55 PM,
Post: #1
|
|||
|
|||
|
K-tag and china bdm100 adapters-experience
Hello
I need some advice from an experienced people here who allready used ktag and china bdm100 adapters for reading and writing an ecu..I read a lot of edc16 ecu(bmw,psa,vag..) with bosch bdm100 adaper and works perfect, now I would like to know more about marrelli,siemens and delphi bdm100 adapters and ktag  My first qestion is MARRELLI bdm pads..from ktag and bdm100 user manuals pin1 is not at the same place  If you look carefully(pictures bellow) ktag pin1 and2 is on left side where are pin11 and12 of bdm100(empty pads)? Can anybody explain this,please? Texa idc4, Renault canclip V156, PSA XS evolution 8.22, autocom, multiecuscan, OP-COM 1.64, VCDS, TOYOTA techstream, MPPS V16 eu, Digiprog3, Bmw rheingold, carprog
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
K-tag and china bdm100 adapters-experience - by grmsek.damjan - 30-03-2017, 20:55 PM
RE: K-tag and china bdm100 adapters-experience - by QUICK SERVICE - 31-03-2017, 04:30 AM
RE: K-tag and china bdm100 adapters-experience - by grmsek.damjan - 01-04-2017, 06:43 AM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
