Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
eCOM ACTIA config
|
25-06-2019, 01:22 AM,
(This post was last modified: 01-07-2019, 20:33 PM by Injectorcentr.)
Post: #1
|
|||
|
|||
eCOM ACTIA config
Since there is little information about configuring Xentry and eCOM, I open this topic! I myself have set everything to “eat the dog” and not suffer anymore. So if I make a mistake, correct me.
Iron: eCOM Aktia, clone № 2xxxxx from here, Lenovo ThinkPad x230 Tablet i5. Software: Xentry 07.2019, thanks,  [b]pesona [/b] took it from here.In principle, after installing Xentry SDConnect Toolkit-immediately sees the multiplexer, but since the eCOM guide is concerned with the separate installation of drivers, and they are already integrated into Xentry, I ran into a problem by doing I + ME ACTIA D-PDU API.Test: ![[Image: full_U87YLt2Q.jpg]](https://injectorcentr.ru/uploads/s/c/f/p/cfpihgcla4az/img/full_U87YLt2Q.jpg) Comparing with the eCOM manual: ![[Image: full_7mc3ZVq2.jpg]](https://injectorcentr.ru/uploads/s/c/f/p/cfpihgcla4az/img/full_7mc3ZVq2.jpg) Can anyone suggest further action ??? |
