Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
VW too new for Ktag
30-09-2017, 08:52 AM,
Post: #11
|
|||
|
|||
RE: VW too new for Ktag
Understood. I could read the ID via Golf7. But it's to dangerous for me not to have the ori file for future work (ckecksum correction). So I have to wait until I can buy a newer china clone or upgrade my current device.
Thanks for your help. Motor: R4 2,0L EDC HW Ver.: 04L907309K SW Upg.: 04L906016GP 1670 Anlage: EDC17 CB.06.07.02 C50.00 |
|||
30-09-2017, 09:11 AM,
(This post was last modified: 30-09-2017, 09:15 AM by rs@chip.)
Post: #12
|
|||
|
|||
RE: VW too new for Ktag
(30-09-2017, 08:52 AM)Zamperl Wrote: Understood. I could read the ID via Golf7. But it's to dangerous for me not to have the ori file for future work (ckecksum correction). So I have to wait until I can buy a newer china clone or upgrade my current device. It is same protocol same crc...I write caddy 2015 same as yourse no problem...but if you re not sure beter take ecu out and read bootmode look: http://cartechnology.co.uk/showthread.ph...rtual+file |
|||
30-09-2017, 16:30 PM,
Post: #13
|
|||
|
|||
RE: VW too new for Ktag
(29-09-2017, 20:51 PM)Zamperl Wrote: @ betrescudan:Why should I buy an upgrade for a clone? Would it be better to buy a new device? look on the attachement the protocols enabled for new firmwares and will understand for what need update with new nxp and sdcard i hope this time to not erase someone again my post |