[rabie_m]

I always use WinOls to correct checksum when the ecu is supported. Howevever this ecu is not supported in my winols.

I have two other checksum programs one is a paid for professional software by mtx, but again your ecu was not supported. I spent a lot of time trying to find the checksum on your ecu and ecm titanium (18000 driver) said yes !

However it seems ecm titanium maybe wrong, and it also seems your fg54 does not correct it either. So, the lesson is, always always always re check your checksum yourself, even if someone else says its ok

Dpf is off good.

Sent from my SM-N910F using Tapatalk

HER IS CHEKSUM OK

[dimitar]

Need help with peugeot 407hdi 2.0 sid803a to turn egr and dpf off

thanks in advance

[VovAS]

Hi !
Need help with renault scenic3 2009 1.5DCI sid305 to egr off(disconnect connector) and dpf off

thanks in advance!

[Dinoro]

Need help with peugeot 407hdi 2.0 sid803a to turn egr and dpf off

thanks in advance

u have password in PM

[NEGOCAUTO33]

Hello

if necessary I can help you for dpf off the first file.
Contact me by MAIL ONLY : xxxxxxxxxxxxxxxxx

just mail not MP or forum thanks


I own swiftec + WinOLS f + ECM .
any software licensed.

pleasure

Best regards

hi Fabio ,

i hope possible find solution for my problem
http://cartechnology.co.uk/showthread.php?tid=12255
best regards

[Enabled]

Looking for some help (and a challenge for someone?) for DPF off for North American model Mercedes/Dodge Sprinter 3.0 V6.

(Preferably EGR DTC off and Vmax disabled as well... but I can't ask too much.)

Thanks in advance.

[rjyves]

Hi,
please help me where is the probleme with my dump
help
correcte it[/align]

[mike_service]

Hi
are you looking for dpf off+egr off or only dpf off file ? Vmax not are in flash,you have to set with Star diagnosis becouse are in eep area !

Regards

Mike

[rjyves]

Yes am loking for dpf and egr off with ecusafe i hade probleme 3152-0001
thanks

[mike_service]

Hi
ECU safe not a software for mercedes car,better are manual file made with WinOLS