[MartinB]

Hey,

i tried to figure out how to connect to my car (E-Series e93) using ISTA-P and the D-Can->Icom emulator which is present in BMW ISTA-P Loader V4.6.exe however whenever i try to connect to it its stuck while trying to detect the VIN.
A small ediabas icon turns red in my taskbar which indicates an error i guess ?

So is this some sort of issue with the emulator not using the right com port or am i doing sth else wrong.

The only thread that wouldve solved my issues seems to be deleted.
ISTA-D in Ediabas mode works just fine.

ISTA-P Version 3.58.0.500

Kind regards
Martin

[ProUniverse]

Hello Martin,

Try this:

- start ISTA Loader 4.6
- CLICK "Start ICOM Emulator"
- wait a Moment
- go to the ediabas.ini and set TCP IP to 169.254.0.1
- save ediabas.ini
- start ISTA-p and connect to your Car

That needs to be repeated at each start!

This works fine for me and is the only way to connect to my Car.

I hope I could help

best regards
Martin

[MartinB]

Lets see i still get the red icon on ediabas and it shows no sign of connection.

[bobdinro]

Buy a good kable dude!!!

[beemerboy88]

Install patched ediabas (do not edit).
Run emulator networktool.exe to create USB connection (169.254.0.8).
Set K+DCAN to com9.

[MartinB]

Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

€dit
Nope didnt fix it still no connection possible Error code: 10007
I reinstalled patched ediabas and executed the networktool.exe which prompted me to reboot.
How can i verify it created the usb connection ?

Kind regards
Martin

[bobdinro]

Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

Kind regards
Martin

instal patched ediabas 7.3.0 and then set usb com 9, use network tool like beemerboy says, use 169.254.0.8 static ip adress to network USB connection

[MartinB]

Buy a good kable dude!!!

mine are from odbexpert they worked pretty well with ista-d.
Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done.

Kind regards
Martin

instal patched ediabas 7.3.0 and then set usb com 9, use network tool like beemerboy says, use 169.254.0.8 static ip adress to network USB connection

See my edit i did all this where is this network usb connection?
Outch sorry that i wasted your time my static ip was set to .7 not .8

Thanks to all of you guys!

[vvadim66]

Hello!

I need your help if it is possible.
I did istalled ISTA/D and ISTA/P.

ISTA/D working w/o any issue with K+DCAN cable, but ISTA/P
cannot see K+DCAN in Connection Manager.

WIN7
Loader 4.6

Any ideas, suggestions?

Thank you.