Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ ISTA-P D-Can => ICOM Emulator connection problem
03-05-2016, 18:11 PM,
Post: #1
|
|||
|
|||
ISTA-P D-Can => ICOM Emulator connection problem
Hey,
i tried to figure out how to connect to my car (E-Series e93) using ISTA-P and the D-Can->Icom emulator which is present in BMW ISTA-P Loader V4.6.exe however whenever i try to connect to it its stuck while trying to detect the VIN. A small ediabas icon turns red in my taskbar which indicates an error i guess ? So is this some sort of issue with the emulator not using the right com port or am i doing sth else wrong. The only thread that wouldve solved my issues seems to be deleted. ISTA-D in Ediabas mode works just fine. ISTA-P Version 3.58.0.500 Kind regards Martin |
|||
03-05-2016, 18:28 PM,
Post: #2
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
Hello Martin,
Try this: - start ISTA Loader 4.6 - CLICK "Start ICOM Emulator" - wait a Moment - go to the ediabas.ini and set TCP IP to 169.254.0.1 - save ediabas.ini - start ISTA-p and connect to your Car That needs to be repeated at each start! This works fine for me and is the only way to connect to my Car. I hope I could help best regards Martin |
|||
03-05-2016, 18:35 PM,
Post: #3
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
Lets see i still get the red icon on ediabas and it shows no sign of connection.
|
|||
03-05-2016, 19:25 PM,
Post: #4
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
Buy a good kable dude!!!
|
|||
03-05-2016, 19:28 PM,
Post: #5
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
Install patched ediabas (do not edit).
Run emulator networktool.exe to create USB connection (169.254.0.8). Set K+DCAN to com9. |
|||
Reputation: +1 - MartinB [+1] | |||
03-05-2016, 19:33 PM,
Post: #6
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
(03-05-2016, 19:25 PM)bobdinro Wrote: Buy a good kable dude!!! mine are from odbexpert they worked pretty well with ista-d. Mine are on com4 atm i will relocate them to com9 ty i will edit this post if im done. €dit Nope didnt fix it still no connection possible Error code: 10007 I reinstalled patched ediabas and executed the networktool.exe which prompted me to reboot. How can i verify it created the usb connection ? Kind regards Martin |
|||
03-05-2016, 19:46 PM,
Post: #7
|
|||
|
|||
!
(03-05-2016, 19:33 PM)MartinB Wrote:(03-05-2016, 19:25 PM)bobdinro Wrote: Buy a good kable dude!!! instal patched ediabas 7.3.0 and then set usb com 9, use network tool like beemerboy says, use 169.254.0.8 static ip adress to network USB connection |
|||
Reputation: +1 - MartinB [+1] | |||
03-05-2016, 19:55 PM,
Post: #8
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
(03-05-2016, 19:46 PM)bobdinro Wrote:(03-05-2016, 19:33 PM)MartinB Wrote:(03-05-2016, 19:25 PM)bobdinro Wrote: Buy a good kable dude!!! See my edit i did all this where is this network usb connection? Outch sorry that i wasted your time my static ip was set to .7 not .8 Thanks to all of you guys! |
|||
04-05-2016, 17:20 PM,
Post: #9
|
|||
|
|||
RE: ISTA-P D-Can => ICOM Emulator connection problem
Hello!
I need your help if it is possible. I did istalled ISTA/D and ISTA/P. ISTA/D working w/o any issue with K+DCAN cable, but ISTA/P cannot see K+DCAN in Connection Manager. WIN7 Loader 4.6 Any ideas, suggestions? Thank you. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content