[szr]

Hello,

I tryed to code my e93 335i today to folding roof while driving.

I need to change GESCHWINDIGKEIT value (default werte_02 (00km/h) ) to 1eh (30km/h)

I must code it via nettodata and I never did this. Can someone give me a quick how to do instuctions?

Also I tryed to code my hazard lights to double blink. I have tryed to change the werte to werte_03 but it seems to not working.

[Bimmer540]

CTM/CVM module in order to operate roof while driving (in motion):

The line that needs to be change is GESCHWINDIGKEIT
default should be wert_02 (which is 00 km/h)
After using NCSDummy you can change it to the following values
32 = 50km/h (which i think is way too high, but it's your call)
1eh = 30km/h
14h = 20km/h

[szr]

CTM/CVM module in order to operate roof while driving (in motion):

The line that needs to be change is GESCHWINDIGKEIT
default should be wert_02 (which is 00 km/h)
After using NCSDummy you can change it to the following values
32 = 50km/h (which i think is way too high, but it's your call)
1eh = 30km/h
14h = 20km/h

Thanks for you reply, but its just copy past from monero1 post from e90forun. Also you can't change parameters like you change activr- nicht active choices. Also when I load trace file I only can choice 2 values. Thats why i need to do nettodata coding.

[lowtrade]

Use the NCSDummy and load the nettodat file to change the value.