Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Tried to flash RCD-510, Now it´s "dead"...
17-01-2017, 17:15 PM,
(This post was last modified: 17-01-2017, 21:23 PM by Mex165.)
Post: #1
|
|||
|
|||
Tried to flash RCD-510, Now it´s "dead"...
So i tried to flash my RCD510 (with 3C8035190__0171.sgo) and after 20min and 35% i got "ERROR"...
If anybody have the original file: 3C8 035 190 Radio RCD510 040 0167 Or any other suggestions, that would make me very happy Well just got passed 40min (70%) and "!!!ERROR!!!", so i must be doing something right/wrong?!?! |
|||
18-01-2017, 05:34 AM,
Post: #2
|
|||
|
|||
RE: Tried to flash RCD-510, Now it´s "dead"...
I didn't update the RCD510 firmware.
I remeber there's option you can modified to enable the engineering mode for updating firmware. Have you enable it? BMW 5 Series and Audi Q4 e-tron user.
If it helps, please give rep , thanks! |
|||
18-01-2017, 08:01 AM,
(This post was last modified: 18-01-2017, 08:01 AM by Mex165.)
Post: #3
|
|||
|
|||
RE: Tried to flash RCD-510, Now it´s "dead"...
Engineering mode is just for update via usb.
With ODIS you "just" flash, but im guessing it´s VERY sensitive and thats why it fails. I will try again today, with some modifications |
|||
18-01-2017, 09:33 AM,
Post: #4
|
|||
|
|||
RE: Tried to flash RCD-510, Now it´s "dead"...
Did you connect the battery charger to keep the battery voltage stable at 14.4V
If My Post Was Helpful
Than Please Click On Thanks & Rep.. |
|||
18-01-2017, 11:15 AM,
(This post was last modified: 18-01-2017, 16:08 PM by Mex165.)
Post: #5
|
|||
|
|||
RE: Tried to flash RCD-510, Now it´s "dead"...
Yes, but today i have one extra battery in between and 14.7V.
But first attempt only got me to 45%...! So even though it´s still a brick, im still getting past 5-10% that was the "top score" Before. New record!!! 78% This is a mystery!! |
|||
20-01-2017, 08:03 AM,
Post: #6
|
|||
|
|||
RE: Tried to flash RCD-510, Now it´s "dead"...
Is it even possible to flash with the J2534 directly to the radio?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content